Difference between revisions of "Motor Sports Templates II"
| Line 9: | Line 9: | ||
[[File:msp_temp22.png|right]] | [[File:msp_temp22.png|right]] | ||
===Current Template Values:=== | ===Current Template Values:=== | ||
| + | *The distance labeled "'''L1'''" (default 1) is the length from the center of the middle hole to the center of the stud holes. | ||
| + | *The distance labeled "'''D1'''" (default 5) is the length of the diameter of the outside edge of the part. | ||
| + | *The distance labeled "'''D2'''" (default 3) is the length of the diameter of the center hole. | ||
| + | *The distance labeled "'''D3'''" (default .5) is the length of the diameter of the stud holes. | ||
| + | *The pink "'''#'''" is the number of stud holes the user would like to create circling the part. | ||
| + | |||
| + | ==Tube Tab== | ||
| + | [[File:msp_temp23.png|right]] | ||
| + | ===Current Template Values:=== | ||
| + | *The distance labeled "'''L1'''" (default 5) is the length from the center of the top hole to the center of the bottom hole. | ||
| + | *The distance labeled "'''R1'''" (default 1) is the length from the center of the top hole to the top arc. | ||
| + | *The distance labeled "'''R2'''" (default 2) is the length from the center of the bottom hole to the bottom arc. | ||
| + | *The distance labeled "'''D1'''" (default 5) is the length of the diameter of the top hole. | ||
| + | *The distance labeled "'''D2'''" (default 3) is the length of the diameter of the bottom hole. | ||
Revision as of 15:10, 25 November 2014
...Motor Sports Templates Continued.
For initial information on MSP Templates, see Motor Sport Templates.
Contents
Mounts Category 
- The fourth button in the "Style of Plate" section is for Shackles, Mounts, and Plates style projects.
Spare Tire Mount
Current Template Values:
- The distance labeled "L1" (default 1) is the length from the center of the middle hole to the center of the stud holes.
- The distance labeled "D1" (default 5) is the length of the diameter of the outside edge of the part.
- The distance labeled "D2" (default 3) is the length of the diameter of the center hole.
- The distance labeled "D3" (default .5) is the length of the diameter of the stud holes.
- The pink "#" is the number of stud holes the user would like to create circling the part.
Tube Tab
Current Template Values:
- The distance labeled "L1" (default 5) is the length from the center of the top hole to the center of the bottom hole.
- The distance labeled "R1" (default 1) is the length from the center of the top hole to the top arc.
- The distance labeled "R2" (default 2) is the length from the center of the bottom hole to the bottom arc.
- The distance labeled "D1" (default 5) is the length of the diameter of the top hole.
- The distance labeled "D2" (default 3) is the length of the diameter of the bottom hole.
