Difference between revisions of "Dragon Material Settings"

From Bend-Tech 7x Wiki
Jump to: navigation, search
(Text Size:)
 
(60 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
'''The Dragon Material Settings page is meant to show the user how the Dragon machine reacts to your different material and tooling settings. These are general guidelines meant to give you understanding about your material machine settings and how they operate both within the software and in the practical application of the Dragon machine.'''
 
'''The Dragon Material Settings page is meant to show the user how the Dragon machine reacts to your different material and tooling settings. These are general guidelines meant to give you understanding about your material machine settings and how they operate both within the software and in the practical application of the Dragon machine.'''
  
[[File:Drag_Tube_General_Tab1.png|center]]
 
  
*To access the Material Settings, first select the '''[[Tube/Pipe Library]]''' from the Dragon '''Task Menu Screen'''.
+
===Material Machine Settings Video===
 +
'''[https://youtu.be/q9D4oRMRbxo Standard Material Machine Settings]'''
 +
 
 +
===Hypertherm Manual Links===
 +
'''[http://www.bendtechdragon.com/files/hypertherm_powermax_45_owners_manual.pdf Hypertherm Powermax 45 Manual]'''
 +
 
 +
'''[http://www.bendtechdragon.com/files/hypertherm_powermax_45_xp_owners_manual.pdf Hypertherm Powermax 45 XP Manual]'''
 +
 
 +
'''[http://www.bendtechdragon.com/files/hypertherm_powermax_65-85_owners_manual.pdf Hypertherm Powermax 65-85 Manual]'''
 +
 
 +
'''[http://www.bendtechdragon.com/files/mrt_-_duramax_retrofit_for_1000-1250-1650.pdf MRT Duramax Retrofit for Powermax 1000-1250-1650 Manual]'''
 +
 
 +
'''[http://www.bendtechdragon.com/files/mrt2_-_duramax_retrofit_for_600-800-900-max42-max43.pdf MRT2 Duramax Retrofit for Powermax 600-800-900-MAX42-MAX43 Manual]'''
 +
 
 +
 
 +
*To access the Material Settings, first select the '''[[Tube/Pipe Library]]''' from the Dragon '''[[Task Menu]] Screen'''.
  
 
==General==
 
==General==
[[File:Drag_Tube_General_sTab1.png|right]]
+
[[File:Drag_Tube_General_Tab1.png|right]]
 
===Material Properties===
 
===Material Properties===
 
[[File:Drag_Tube_General_Tab2.png]]
 
[[File:Drag_Tube_General_Tab2.png]]
Line 19: Line 33:
 
*The color of the material can be chosen using the Color button. [[File:Color_button.png]] This color will be used to shade the material in various areas throughout the software.  
 
*The color of the material can be chosen using the Color button. [[File:Color_button.png]] This color will be used to shade the material in various areas throughout the software.  
  
===Type:===
+
====Unit of Measure:====
*Tube material can be either round, square, or rectangle.
 
 
 
===Units:===
 
 
*Parts can be measured in either inches or millimeters.
 
*Parts can be measured in either inches or millimeters.
  
===Polyline Resolutions:===
+
===Select Shape:===
[[File:Drag_Tube_General_Tab3.png]]
+
*Tube material can be either Round, Square, or Rectangle. If you have our newest capabilities, you can also choose L-Channel (Angle Iron) or U-Channel.
 
 
====Max Length:====
 
*This is where the user will enter the maximum length for each segment in a polyline. A segment will be ignored if it is longer than this value. If the segment is shorter, it may be combined with an adjacent segment to create a single segment.
 
 
 
====Max Angle:====
 
*This is where the user will enter the maximum angle between two segments in a polyline. If the angle is smaller than this value, the two segments may be combined to create a single segment.
 
 
 
====Max Offset:====
 
*This is where the user will enter the maximum boundary offset for a polyline. If the combination of two line segments breaches the boundary defined by this value, the features will not be combined.
 
  
 
====Wall Thickness, Diameter, and Height:====
 
====Wall Thickness, Diameter, and Height:====
 
*Depending on the type of material chosen, there will be different dimensions that will need to be supplied. If the material is round or square, the wall thickness and diameter measurements will be required. These values will be entered into the fields on the material diagram. If the material is rectangular, the wall thickness, diameter/width, and height will need to be provided. Note: The diameter/width and height of all materials are measured from the outside edges.
 
*Depending on the type of material chosen, there will be different dimensions that will need to be supplied. If the material is round or square, the wall thickness and diameter measurements will be required. These values will be entered into the fields on the material diagram. If the material is rectangular, the wall thickness, diameter/width, and height will need to be provided. Note: The diameter/width and height of all materials are measured from the outside edges.
  
[[File:Mat_lib_1.png]][[File:Mat_lib_2.png]]  
+
[[File:Mat_lib_1.png]][[File:Mat_lib_2.png]]
  
 
==Machine Settings==
 
==Machine Settings==
Line 52: Line 54:
 
*This is the size (width) of the cutting path determined by your plasma torch. This is generally between 0.05 and 0.06 depending on your plasma torch settings and type of torch you own. Consumables that you're using and amperage can change this number considerably, so we suggest a test in order to measure the exact width.
 
*This is the size (width) of the cutting path determined by your plasma torch. This is generally between 0.05 and 0.06 depending on your plasma torch settings and type of torch you own. Consumables that you're using and amperage can change this number considerably, so we suggest a test in order to measure the exact width.
  
====Minimum Web:====
+
====Cutting Overlap:====
 +
*This is the amount of under travel or over travel that a cut profile will perform. This can be changed under certain circumstances. One of which would be in order to leave a certain amount of material attaching your stock tube to the cut part in order to break it off after the cut is performed.
 +
 
 +
====Web Spacing:====
 
*This is the amount of material selected to be left between any nested parts. We recommend to set this number to 0.5 to indicate that a half of an inch will be left between these parts. This will help accommodate for lead-ins and lead-outs that may require this extra space.
 
*This is the amount of material selected to be left between any nested parts. We recommend to set this number to 0.5 to indicate that a half of an inch will be left between these parts. This will help accommodate for lead-ins and lead-outs that may require this extra space.
  
 
====Default Length:====
 
====Default Length:====
*This section indicates your default stock length of tubing typically associated with this material. Every time you select this material, your stock length of tubing in your nesting projects will default to this number. This will be input in inches.
+
*This section indicates your default stock length of tubing typically associated with this material. Every time you select this material, your stock length of tubing in your nesting projects will default to this number. This will be input in the unit type specified in the '''General''' tab for this material.
  
====Cutting Overlap:====
+
====Edge Cut Offset:====
*This is the amount of under travel or over travel that a cut profile will perform. This can be changed under certain circumstances. One of which would be in order to leave a certain amount of material attaching your stock tube to the cut part in order to break it off after the cut is performed.
+
*'''For l-channel (angle iron) and u-channel only''', this will be the distance beyond the edge of the material the lead in/out will extend when performing edge cuts.
 +
 
 +
====Chuck Grip:====
 +
*This setting is used to indicate whether or not you will be using the pass-through of the chuck for this material or if it will require the use of the steps on the chuck jaws. Indicating the use of any other option except for the pass-through, the software will adjust loading, flipping, repositioning, and dead zone locations based on the chuck grip selected.
 +
 
 +
[[File:Question_Mark_Picture1.png]]
 +
 
 +
*Click on the question mark icon in the software to see an image of the different steps on the chuck to help you determine what will be needed for the selected material.
 +
 
 +
[[File:Question_Mark_Picture2.png]]
 +
 
 +
===Tool Heights===
 +
[[File:Drag_Height_Offsets1.png]]
 +
<div style="font-size:12pt;color:#d50000;">
 +
-Typical Settings-
 +
</div>
 +
====Cutting Height:====
 +
*This is the number indicating how far off the tubing the torch head will be located during cutting. This height depends on the model of torch you have as well as the material thickness. ''Refer to your hypertherm manual for an exact height. Links to manuals are located at the top of this page.''
 +
 
 +
====Marking Height:====
 +
*This number is meant to adjust the calibration values correlated to the height the marker head. (Example) If the tubing was entered as 1.75 OD, but the actual OD is 1.74, then you may enter a -.01 in this field in order to compensate for the difference in tube diameter when marking. '''This value should almost always be set to 0.'''
 +
 
 +
====Engraving Height:====
 +
*This number is meant to adjust the calibration values correlated to the height the engraver head. (Example) If the tubing was entered as 1.75 OD, but the actual OD is 1.74, then you may enter a -.01 in this field in order to compensate for the difference in tube diameter when engraving. '''This value should almost always be set to 0.'''
 +
 
 +
====Pierce Height:====
 +
*This number will indicate the distance that the torch will be placed off of the tubing during the piercing process of a cut. This is always 2 1/2 times the cutting height. ''Refer to your hypertherm manual for an exact height. Links to manuals are located at the top of this page.''
 +
 
 +
===Support Lifter Gap:===
 +
'''Not available on the Dragon A150 Series.'''
 +
 
 +
[[File:Material_Drag_Lifter_Gap1.png]]
 +
 
 +
*This is the gap amount desired from the current lifter height. To allow for an element of '''increased sag''' in the material, '''enter a positive distance value'''. To '''reduce sag''' in the material, '''enter a negative value'''.
 +
 
 +
*Lifter 1 (B): is your standard lifter station provided with the Dragon A400 machine. Lifter 2(C): is for use if you've purchased, or designed an additional lifter station.
 +
 
 +
===Corner Rotation Ext===
 +
 
 +
'''*For square or rectangle material only'''
 +
 
 +
[[File:Drag_Corner_Rotation_Ext1.png]]
  
====Text Size:====
+
*The '''[[Corner Rotation Extension]]''' is a distance entered by the user that will cause the material to rotate before the corner radius of the material itself. This is used in cases where the wall thickness is wider than that of the extension of the corner radius on a square or rectangle material. Click the blue lettering for a visual representation of how this works.
*(OBSOLETE - Removed in previous version) This is the text size used for auto generated text (such as holesaw information). This text will not be seen under most circumstances. Default should be set to 1. This is the height of the text (in inches).
 
  
 
===Feed Rates===
 
===Feed Rates===
Line 70: Line 115:
 
</div>
 
</div>
 
====Cutting Feed Rate:====
 
====Cutting Feed Rate:====
*This setting determines the rate at which the machine's torch moves in the act of performing a cut. ''These feed rates are dependent on your particular torch and thickness of material, so be sure to check your Hypertherm manual for exact cutting feed rates. Links to manuals are located at the bottom of this page.''
+
*This setting determines the rate at which the machine's torch moves in the act of performing a cut. ''These feed rates are dependent on your particular torch and thickness of material, so be sure to check your Hypertherm manual for exact cutting feed rates. Links to manuals are located at the top of this page.''
  
 
====Engraving Feed Rate:====
 
====Engraving Feed Rate:====
Line 78: Line 123:
 
*This is the rate at which the marker travels along the tubing. This can remain at '''100 inches per minute''' to ensure a smooth line with the marker.
 
*This is the rate at which the marker travels along the tubing. This can remain at '''100 inches per minute''' to ensure a smooth line with the marker.
  
===Height Offsets===
+
====Rotation Speeds:====
[[File:Drag_Height_Offsets1.png]]
+
 
<div style="font-size:12pt;color:#d50000;">
+
[[File:Drag_Rotation_Speeds1.png]]
-Typical Settings-
+
 
</div>
+
*This '''Rotation Speeds''' setting sets the rate at which the chuck rotates during functions in a shift. This should be lowered with heavier, large OD material or in the case that you're using square or rectangle material with sharp corners. A lower rotational speed ensures that the rotational motor will not move too quickly and over-step the steps in the motor.
====Cutting Height:====
+
 
*This is the number indicating how far off the tubing the torch head will be located during cutting. This height depends on the model of torch you have as well as the material thickness. ''Refer to your hypertherm manual for an exact height. Links to manuals are located at the bottom of this page.''
+
====Machine Acceleration:====
 +
 
 +
[[File:Drag_Acceleration_Speeds1.png]]
 +
 
 +
*'''Travel (X):''' The value entered here will set the acceleration for the X-axis when running jobs using this material. A lower value should be used with larger, heavier OD tubing/pipe. As an example: A typical value which could be all encompassing would be '5-10'. This would be applicable to up to 6" tubing with a 0.25" wall thickness. Many smaller OD tubing/pipe (0.75 - 1.25 OD) may allow for this value to be around '35'. Set this value to zero to apply the default located in the Factory Settings of the Machine Library (Default is 35).
 +
 
 +
*'''Rotation (Y):''' The value entered here will set the acceleration for the Y-axis when running jobs using this material. A lower value should be used with larger, heavier OD tubing/pipe. As an example: A typical value would be around '5' considering it will allow the material a smoother rotational ramp up and ramp down action. The lower the number, the longer the rotational axis takes to reach it's maximum cutting speed. Set this value to zero to apply the default located in the Factory Settings of the Machine Library (Default is 1: This value is indicating a 100% of normal value using a specific formula for determining Y-axis acceleration).
  
====Marking Height:====
+
===Misc Settings===
*This number is meant to adjust the calibration values correlated to the height the marker head. (Example) If the tubing was entered as 1.75 OD, but the actual OD is 1.74, then you may enter a -.01 in this field in order to compensate for the difference in tube diameter when marking. '''This value should almost always be set to 0.'''
 
  
====Engraving Height:====
+
====Use Bridge Cutting====
*This number is meant to adjust the calibration values correlated to the height the engraver head. (Example) If the tubing was entered as 1.75 OD, but the actual OD is 1.74, then you may enter a -.01 in this field in order to compensate for the difference in tube diameter when engraving. '''This value should almost always be set to 0.'''
+
*When this check box in checked, any newly made nest with this material will automatically keep the torch firing as it moves from the end cut of the previous part to the start cut of the next part.
  
====Torch Touch Off:====
+
====Disable Lifter Station====
* (OBSOLETE - Removed in Version 1.05.00) This number is meant to adjust the calibration values correlated to the height the torch head. (Example) If the tubing was entered as 1.75 OD, but the actual OD is 1.74, then you may enter a -.01 in this field in order to compensate for the difference in tube diameter when cutting. '''This value should almost always be set to 0.'''
+
'''Not available on the Dragon A150 Series.'''
  
====Pierce Height:====
+
*When this check box is checked, the lifter station will be ignored in any new project with this material when it is sent to the Dragon machine. The lifter will not require a homing sequence, nor will it be used during the run.
*This number will indicate the distance that the torch will be placed off of the tubing during the piercing process of a cut. This is always 2 1/2 times the cutting height. ''Refer to your hypertherm manual for an exact height. Links to manuals are located at the bottom of this page.''
 
  
 
==Lead In/Out Defaults==
 
==Lead In/Out Defaults==
 
[[File:Drag_Lead_In_Out_Default_Settings1.png|right]]
 
[[File:Drag_Lead_In_Out_Default_Settings1.png|right]]
===Start/End Cut Lead Defaults: Ignite Settings===
+
===End Cut Profile Lead Defaults===
 
*These settings are completely user specified and can vary based on the user's preference.
 
*These settings are completely user specified and can vary based on the user's preference.
 +
 
[[File:Drag_Ignite_Settings1.png]]
 
[[File:Drag_Ignite_Settings1.png]]
 
<div style="font-size:12pt;color:#d50000;">
 
<div style="font-size:12pt;color:#d50000;">
 
-Suggested Settings-
 
-Suggested Settings-
 
</div>
 
</div>
====Ignite Type:====
+
===Lead In Type:===
*This is where the user will select the type of lead-in ignite type that will be set to this material by default. '''Arc with Angle''' is our preferred method. This means that the torch will initiate its cut into the material at an angle which will ease into an arc and then to the intended cut profile. This is a smooth ignite type and leaves little chance for error.
+
*This is where the user will select the type of lead-in ignite type that will be set to this material by default. '''Arc with Angle''' is a preferred method. This means that the torch will initiate its cut into the material at an angle which will ease into an arc and then to the intended cut profile. This is a smooth ignite type and leaves little chance for error.
 
 
====Dwell Time(sec):====
 
*This indicates how long the torch will remain on one place during the pierce. This can differ based on your torch and material type and thickness. ''Refer to your hypertherm manual for an exact time. Links to manuals are located at the bottom of this page.''
 
  
 
====Length/Distance:====
 
====Length/Distance:====
 
*This is the length of the line that eases into the actual cut profile. We can keep this relatively short. We recommend '''.125''' in most cases.
 
*This is the length of the line that eases into the actual cut profile. We can keep this relatively short. We recommend '''.125''' in most cases.
 +
 +
====Dwell Time(sec):====
 +
*This indicates how long the torch will remain on one place during the pierce. This can differ based on your torch and material type and thickness. ''Refer to your hypertherm manual for an exact time. Links to manuals are located at the top of this page.''
  
 
====Angle/Sweep:====
 
====Angle/Sweep:====
Line 121: Line 171:
 
*This is where the user will enter the radius of the arc that channels into the cut profile. We recommend keeping this at around '''.125''' as a preference.
 
*This is where the user will enter the radius of the arc that channels into the cut profile. We recommend keeping this at around '''.125''' as a preference.
  
===Start/End Cut Lead Defaults: Extinguish Settings===
+
 
*These settings are completely user specified and can vary based on the user's preference.
+
 
 
[[File:Drag_Extinguish_Settings1.png]]
 
[[File:Drag_Extinguish_Settings1.png]]
 
<div style="font-size:12pt;color:#d50000;">
 
<div style="font-size:12pt;color:#d50000;">
 
-Suggested Settings-
 
-Suggested Settings-
 
</div>
 
</div>
====Extinguish Type:====
+
===Lead Out Type:===
*This is where the user will select the type of lead-out extinguish type that will be set to this material by default. '''Perpendicular''' is our preferred method. This means that the torch will extinguish its cut at a perpendicular angle after the cut profile has been performed. This is a  extinguish type that leaves the cut profile smoothly at a 90 degree angle.
+
*This is where the user will select the type of lead-out extinguish type that will be set to this material by default. '''Perpendicular''' is a preferred method. This means that the torch will extinguish its cut at a perpendicular angle after the cut profile has been performed. This is a  extinguish type that leaves the cut profile smoothly at a 90 degree angle.
 +
 
 +
====Length/Distance:====
 +
*This is the length of the line that eases out of the cut profile. We can keep this relatively short. We recommend '''.125''' in most cases.
  
 
====Dwell Time(sec):====
 
====Dwell Time(sec):====
 
*This indicates how long the torch will remain on one place during the extinguishing stage of the torch. This can be set to '''0'''.
 
*This indicates how long the torch will remain on one place during the extinguishing stage of the torch. This can be set to '''0'''.
 
====Length/Distance:====
 
*This is the length of the line that eases out of the cut profile. We can keep this relatively short. We recommend '''.125''' in most cases.
 
  
 
====Angle/Sweep:====
 
====Angle/Sweep:====
Line 142: Line 192:
 
*This is where the user will enter the radius of the arc that channels out of the cut profile. This will be greyed out when the perpendicular extinguish type is set as a default.
 
*This is where the user will enter the radius of the arc that channels out of the cut profile. This will be greyed out when the perpendicular extinguish type is set as a default.
  
===Other Cut Lead Defaults===
+
===Internal Cut Lead Defaults===
 
*'''All other cut lead defaults can be set like the original cut lead defaults. These are meant for all cuts other that the start and end cuts of a part.'''
 
*'''All other cut lead defaults can be set like the original cut lead defaults. These are meant for all cuts other that the start and end cuts of a part.'''
  
Line 150: Line 200:
 
[[File:Drag_NRC_Settings1.png|right]]
 
[[File:Drag_NRC_Settings1.png|right]]
 
===Input Values===
 
===Input Values===
*With NRC cutting, the further from the centerline you are cutting, the thicker the material is. '''This grid allows you to make fine tuning adjustments.''' With the default first line, the entire cut will have a feed rate of 150 inches per second (ips) and a height of .06. If you find that when it gets thicker it's not cutting all the way through, then you would add an entry so that when it gets to that thickness, it will slow down or cut at a different height. In the picture below, when the thickness of the tube is .13 or greater, the feed rate will slow down by 10(making it 140), and the height will not change. When the thickness is .15 or greater, it slows down the feed rate by 25(making it 125) and lowers the cut height -.01(making it .05).
+
*With NRC cutting, the further from the centerline you're cutting, the thicker the material is. '''This grid allows you to make fine tuning adjustments.''' With the default first line in the example to the right, the entire cut will have a feed rate of 35 inches per minute (ipm) and a height of .06 and a thickness of 0.12. If you find that when it gets thicker it's not cutting all the way through, then you would add an entry so that when it gets to that thickness, it will slow down or cut at a different height. In the picture shown, when the thickness of the tube is .13 or greater, the feed rate will slow down by 10(making it 25), and the height will not change. When the thickness is .15 or greater, it slows down the feed rate by 15(making it 20) and lowers the cut height -.01(making it .05).
  
 
*Inputted values will include the top line indicating your initial '''Thickness, Feed Rate and Cut Height''' and adjustments in feed rates and cut heights based on the thickness you're encountering throughout the duration of the cut. These will be inputted with (+ and -) signs to indicate the adjustment that is to be preformed.
 
*Inputted values will include the top line indicating your initial '''Thickness, Feed Rate and Cut Height''' and adjustments in feed rates and cut heights based on the thickness you're encountering throughout the duration of the cut. These will be inputted with (+ and -) signs to indicate the adjustment that is to be preformed.
  
[[File:Inputted_NRC_Settings1.png]]
 
  
  
  
===Material Machine Settings Video===
 
'''[https://youtu.be/q9D4oRMRbxo Standard Material Machine Settings]'''
 
  
===Hypertherm Manual Links===
 
'''[http://www.bendtechdragon.com/files/hypertherm_powermax_45_owners_manual.pdf Hypertherm Powermax 45 Manual]'''
 
  
'''[http://www.bendtechdragon.com/files/hypertherm_powermax_45_xp_owners_manual.pdf Hypertherm Powermax 45 XP Manual]'''
 
  
'''[http://www.bendtechdragon.com/files/hypertherm_powermax_65-85_owners_manual.pdf Hypertherm Powermax 65-85 Manual]'''
 
  
'''[http://www.bendtechdragon.com/files/mrt_-_duramax_retrofit_for_1000-1250-1650.pdf MRT Duramax Retrofit for Powermax 1000-1250-1650 Manual]'''
 
  
'''[http://www.bendtechdragon.com/files/mrt2_-_duramax_retrofit_for_600-800-900-max42-max43.pdf MRT2 Duramax Retrofit for Powermax 600-800-900-MAX42-MAX43 Manual]'''
+
 
 +
 
 +
 
 +
==Pricing==
 +
[[File:Drag_Pricing_Settings1.png|right]]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
==Advanced==
 +
[[File:Drag_Adv_Settings1.png|right]]
 +
 
 +
 
 +
 
 +
===Polyline Resolutions:===
 +
[[File:Drag_Tube_General_Tab3.png]]
 +
 
 +
====Max Length:====
 +
*This is where the user will enter the maximum length for each segment in a polyline. A segment will be ignored if it is longer than this value. If the segment is shorter, it may be combined with an adjacent segment to create a single segment.
 +
 
 +
====Max Angle:====
 +
*This is where the user will enter the maximum angle between two segments in a polyline. If the angle is smaller than this value, the two segments may be combined to create a single segment.
 +
 
 +
====Max Offset:====
 +
*This is where the user will enter the maximum boundary offset for a polyline. If the combination of two line segments breaches the boundary defined by this value, the features will not be combined.

Latest revision as of 13:58, 19 January 2022

The Dragon Material Settings page is meant to show the user how the Dragon machine reacts to your different material and tooling settings. These are general guidelines meant to give you understanding about your material machine settings and how they operate both within the software and in the practical application of the Dragon machine.


Material Machine Settings Video

Standard Material Machine Settings

Hypertherm Manual Links

Hypertherm Powermax 45 Manual

Hypertherm Powermax 45 XP Manual

Hypertherm Powermax 65-85 Manual

MRT Duramax Retrofit for Powermax 1000-1250-1650 Manual

MRT2 Duramax Retrofit for Powermax 600-800-900-MAX42-MAX43 Manual


General

Drag Tube General Tab1.png

Material Properties

Drag Tube General Tab2.png

Material Name:

  • This title will be used to refer to the material throughout the software. It is recommended to give each a unique, descriptive name to more easily identify each material.

Weight (per inch):

  • The weight of the material per unit can be supplied here. This value is completely optional, but it will be used to calculate the total weight of the part in the part designer interfaces above the results table.

Color:

  • The color of the material can be chosen using the Color button. Color button.png This color will be used to shade the material in various areas throughout the software.

Unit of Measure:

  • Parts can be measured in either inches or millimeters.

Select Shape:

  • Tube material can be either Round, Square, or Rectangle. If you have our newest capabilities, you can also choose L-Channel (Angle Iron) or U-Channel.

Wall Thickness, Diameter, and Height:

  • Depending on the type of material chosen, there will be different dimensions that will need to be supplied. If the material is round or square, the wall thickness and diameter measurements will be required. These values will be entered into the fields on the material diagram. If the material is rectangular, the wall thickness, diameter/width, and height will need to be provided. Note: The diameter/width and height of all materials are measured from the outside edges.

Mat lib 1.pngMat lib 2.png

Machine Settings

Drag Machine Settings3.png

Basic Settings

Drag Tube Basic Settings1.png

-Typical Settings-

Kerf Width:

  • This is the size (width) of the cutting path determined by your plasma torch. This is generally between 0.05 and 0.06 depending on your plasma torch settings and type of torch you own. Consumables that you're using and amperage can change this number considerably, so we suggest a test in order to measure the exact width.

Cutting Overlap:

  • This is the amount of under travel or over travel that a cut profile will perform. This can be changed under certain circumstances. One of which would be in order to leave a certain amount of material attaching your stock tube to the cut part in order to break it off after the cut is performed.

Web Spacing:

  • This is the amount of material selected to be left between any nested parts. We recommend to set this number to 0.5 to indicate that a half of an inch will be left between these parts. This will help accommodate for lead-ins and lead-outs that may require this extra space.

Default Length:

  • This section indicates your default stock length of tubing typically associated with this material. Every time you select this material, your stock length of tubing in your nesting projects will default to this number. This will be input in the unit type specified in the General tab for this material.

Edge Cut Offset:

  • For l-channel (angle iron) and u-channel only, this will be the distance beyond the edge of the material the lead in/out will extend when performing edge cuts.

Chuck Grip:

  • This setting is used to indicate whether or not you will be using the pass-through of the chuck for this material or if it will require the use of the steps on the chuck jaws. Indicating the use of any other option except for the pass-through, the software will adjust loading, flipping, repositioning, and dead zone locations based on the chuck grip selected.

Question Mark Picture1.png

  • Click on the question mark icon in the software to see an image of the different steps on the chuck to help you determine what will be needed for the selected material.

Question Mark Picture2.png

Tool Heights

Drag Height Offsets1.png

-Typical Settings-

Cutting Height:

  • This is the number indicating how far off the tubing the torch head will be located during cutting. This height depends on the model of torch you have as well as the material thickness. Refer to your hypertherm manual for an exact height. Links to manuals are located at the top of this page.

Marking Height:

  • This number is meant to adjust the calibration values correlated to the height the marker head. (Example) If the tubing was entered as 1.75 OD, but the actual OD is 1.74, then you may enter a -.01 in this field in order to compensate for the difference in tube diameter when marking. This value should almost always be set to 0.

Engraving Height:

  • This number is meant to adjust the calibration values correlated to the height the engraver head. (Example) If the tubing was entered as 1.75 OD, but the actual OD is 1.74, then you may enter a -.01 in this field in order to compensate for the difference in tube diameter when engraving. This value should almost always be set to 0.

Pierce Height:

  • This number will indicate the distance that the torch will be placed off of the tubing during the piercing process of a cut. This is always 2 1/2 times the cutting height. Refer to your hypertherm manual for an exact height. Links to manuals are located at the top of this page.

Support Lifter Gap:

Not available on the Dragon A150 Series.

Material Drag Lifter Gap1.png

  • This is the gap amount desired from the current lifter height. To allow for an element of increased sag in the material, enter a positive distance value. To reduce sag in the material, enter a negative value.
  • Lifter 1 (B): is your standard lifter station provided with the Dragon A400 machine. Lifter 2(C): is for use if you've purchased, or designed an additional lifter station.

Corner Rotation Ext

*For square or rectangle material only

Drag Corner Rotation Ext1.png

  • The Corner Rotation Extension is a distance entered by the user that will cause the material to rotate before the corner radius of the material itself. This is used in cases where the wall thickness is wider than that of the extension of the corner radius on a square or rectangle material. Click the blue lettering for a visual representation of how this works.

Feed Rates

Drag Material Feed RAtes1.png

-Typical Settings-

Cutting Feed Rate:

  • This setting determines the rate at which the machine's torch moves in the act of performing a cut. These feed rates are dependent on your particular torch and thickness of material, so be sure to check your Hypertherm manual for exact cutting feed rates. Links to manuals are located at the top of this page.

Engraving Feed Rate:

  • This is the rate at which your engraver travels along the tube. This should be set to 30 inches per minute to ensure consistent engraving.

Marking Feed Rate:

  • This is the rate at which the marker travels along the tubing. This can remain at 100 inches per minute to ensure a smooth line with the marker.

Rotation Speeds:

Drag Rotation Speeds1.png

  • This Rotation Speeds setting sets the rate at which the chuck rotates during functions in a shift. This should be lowered with heavier, large OD material or in the case that you're using square or rectangle material with sharp corners. A lower rotational speed ensures that the rotational motor will not move too quickly and over-step the steps in the motor.

Machine Acceleration:

Drag Acceleration Speeds1.png

  • Travel (X): The value entered here will set the acceleration for the X-axis when running jobs using this material. A lower value should be used with larger, heavier OD tubing/pipe. As an example: A typical value which could be all encompassing would be '5-10'. This would be applicable to up to 6" tubing with a 0.25" wall thickness. Many smaller OD tubing/pipe (0.75 - 1.25 OD) may allow for this value to be around '35'. Set this value to zero to apply the default located in the Factory Settings of the Machine Library (Default is 35).
  • Rotation (Y): The value entered here will set the acceleration for the Y-axis when running jobs using this material. A lower value should be used with larger, heavier OD tubing/pipe. As an example: A typical value would be around '5' considering it will allow the material a smoother rotational ramp up and ramp down action. The lower the number, the longer the rotational axis takes to reach it's maximum cutting speed. Set this value to zero to apply the default located in the Factory Settings of the Machine Library (Default is 1: This value is indicating a 100% of normal value using a specific formula for determining Y-axis acceleration).

Misc Settings

Use Bridge Cutting

  • When this check box in checked, any newly made nest with this material will automatically keep the torch firing as it moves from the end cut of the previous part to the start cut of the next part.

Disable Lifter Station

Not available on the Dragon A150 Series.

  • When this check box is checked, the lifter station will be ignored in any new project with this material when it is sent to the Dragon machine. The lifter will not require a homing sequence, nor will it be used during the run.

Lead In/Out Defaults

Drag Lead In Out Default Settings1.png

End Cut Profile Lead Defaults

  • These settings are completely user specified and can vary based on the user's preference.

Drag Ignite Settings1.png

-Suggested Settings-

Lead In Type:

  • This is where the user will select the type of lead-in ignite type that will be set to this material by default. Arc with Angle is a preferred method. This means that the torch will initiate its cut into the material at an angle which will ease into an arc and then to the intended cut profile. This is a smooth ignite type and leaves little chance for error.

Length/Distance:

  • This is the length of the line that eases into the actual cut profile. We can keep this relatively short. We recommend .125 in most cases.

Dwell Time(sec):

  • This indicates how long the torch will remain on one place during the pierce. This can differ based on your torch and material type and thickness. Refer to your hypertherm manual for an exact time. Links to manuals are located at the top of this page.

Angle/Sweep:

  • This will be the angle at which the initial cut eases into the intended cut. We recommend a 45 degree angle for the ignite cut.

Radius:

  • This is where the user will enter the radius of the arc that channels into the cut profile. We recommend keeping this at around .125 as a preference.


Drag Extinguish Settings1.png

-Suggested Settings-

Lead Out Type:

  • This is where the user will select the type of lead-out extinguish type that will be set to this material by default. Perpendicular is a preferred method. This means that the torch will extinguish its cut at a perpendicular angle after the cut profile has been performed. This is a extinguish type that leaves the cut profile smoothly at a 90 degree angle.

Length/Distance:

  • This is the length of the line that eases out of the cut profile. We can keep this relatively short. We recommend .125 in most cases.

Dwell Time(sec):

  • This indicates how long the torch will remain on one place during the extinguishing stage of the torch. This can be set to 0.

Angle/Sweep:

  • Opposite of the ignite type section, this will be the angle at which the cut eases out of the intended cut. This will be greyed out when the perpendicular extinguish type is set as a default.

Radius:

  • This is where the user will enter the radius of the arc that channels out of the cut profile. This will be greyed out when the perpendicular extinguish type is set as a default.

Internal Cut Lead Defaults

  • All other cut lead defaults can be set like the original cut lead defaults. These are meant for all cuts other that the start and end cuts of a part.

Drag Default Ignite And Extinguish Settings1.png

NRC Settings

Drag NRC Settings1.png

Input Values

  • With NRC cutting, the further from the centerline you're cutting, the thicker the material is. This grid allows you to make fine tuning adjustments. With the default first line in the example to the right, the entire cut will have a feed rate of 35 inches per minute (ipm) and a height of .06 and a thickness of 0.12. If you find that when it gets thicker it's not cutting all the way through, then you would add an entry so that when it gets to that thickness, it will slow down or cut at a different height. In the picture shown, when the thickness of the tube is .13 or greater, the feed rate will slow down by 10(making it 25), and the height will not change. When the thickness is .15 or greater, it slows down the feed rate by 15(making it 20) and lowers the cut height -.01(making it .05).
  • Inputted values will include the top line indicating your initial Thickness, Feed Rate and Cut Height and adjustments in feed rates and cut heights based on the thickness you're encountering throughout the duration of the cut. These will be inputted with (+ and -) signs to indicate the adjustment that is to be preformed.







Pricing

Drag Pricing Settings1.png





















Advanced

Drag Adv Settings1.png


Polyline Resolutions:

Drag Tube General Tab3.png

Max Length:

  • This is where the user will enter the maximum length for each segment in a polyline. A segment will be ignored if it is longer than this value. If the segment is shorter, it may be combined with an adjacent segment to create a single segment.

Max Angle:

  • This is where the user will enter the maximum angle between two segments in a polyline. If the angle is smaller than this value, the two segments may be combined to create a single segment.

Max Offset:

  • This is where the user will enter the maximum boundary offset for a polyline. If the combination of two line segments breaches the boundary defined by this value, the features will not be combined.