Difference between revisions of "Dragon Diamond Notch Bridging Tutorial"

From Bend-Tech 7x Wiki
Jump to: navigation, search
Line 11: Line 11:
 
==Tutorial==
 
==Tutorial==
  
 +
'''1.''' Start by opening up the Bend-Tech Launcher on your computer and select the '''Dragon CAD''' option so we can start our design process.
  
 +
[[File:DNB2.png]]
  
 
+
'''2.''' With the '''Task Menu''' screen open, select the '''Assembly''' designer option to begin drawing our part.
[[File:DNB2.png]]
 
  
 
[[File:DNB3.png]]
 
[[File:DNB3.png]]

Revision as of 10:08, 3 October 2017

Dragon Diamond Notch Bridging Tutorial

DNB1.png

Things To Know

  • This tutorial will step you through the process of creating a straight design in Bend-Tech Dragon CAD, add a notch cutout and show you where to take it next in order to add a notch bridge . As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.



Tutorial

1. Start by opening up the Bend-Tech Launcher on your computer and select the Dragon CAD option so we can start our design process.

DNB2.png

2. With the Task Menu screen open, select the Assembly designer option to begin drawing our part.

DNB3.png

DNB4.png

DNB5.png

DNB6.png

DNB7.png

DNB8.png

DNB9.png

DNB10.png

DNB11.png

DNB12.png

DNB13.png

DNB14.png

DNB15.png

DNB16.png

DNB17.png