Dragon A400 Side Offsets Calibration

From Bend-Tech 7x Wiki
Revision as of 09:40, 10 October 2017 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Dragon A400 Side Offsets Calibration

This calibration is meant for Dragon A400 users experiencing differences in cutting height due to warped or imperfect square and rectangular tubing.

1. If you require a way to calibrate your warped or imperfect tubing, the option is here for you located in the Tube/Pipe Library under the Advanced tab.


Side Offsets Calib1.png

Side Offsets Calib2.png


2. In the Advanced tab, select the Calibration option under the Side Offsets section at the bottom of the window.


Side Offsets Calib3.png


3. The first screen is available to Disable any previously entered material side offsets (as an option) before continuing with the calibration. click Next to start the calibration process.


Side Offsets Calib4.png


4. The calibration window will appear and instruct you to make sure your machine has been powered off before continuing. You are free to move the chuck trolley manually to the front most position to accommodate a shorter length of tubing. IMPORTANT: Make sure the front gate is positioned to its HOME position before continuing.


Side Offsets Calib5.pngSide Offsets Calib5a.png


5.


Side Offsets Calib6.png

Side Offsets Calib7.png

Side Offsets Calib8.png

Side Offsets Calib9.png

Side Offsets Calib10.png

Side Offsets Calib11.png

Side Offsets Calib12.png

Side Offsets Calib13.png

Side Offsets Calib14.png

Side Offsets Calib15.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_A400_Side_Offsets_Calibration&oldid=8899"