Dragon Options

From Bend-Tech 7x Wiki
Jump to: navigation, search

Global Options

General

Dragon General Options1.png

Default Items

  • Default Die: Click on the drop down menu labeled "Default Die:" Dragon Options Die1.png and select a die that you would like to be automatically set when opening a new part.
  • Default Tube/Pipe: Click on the drop down menu labeled "Default Tube/Pipe:" Dragon Options Material1.png and select a material that you would like to be automatically set when opening a new part.
  • Default Machine: Click on the drop down menu labeled "Default Machine:" Dragon Options Machine.png and select a machine that you would like to be automatically set when opening a new nesting project. This should NOT be set to your Factory Calibrated Machine.

File Storage

  • Data Libraries: Click on the text field labeled "Data Libraries:" Dragon Options Data Libraries1.png or click the "Browse" Dragon Options Browse1.png button to designate a file storage location for your data libraries. This includes dies and material information.
  • Parts: Click on the text field labeled "Parts:" Dragon Options Parts1.png or click the "Browse" Dragon Options Browse1.png button to designate a file storage location for your saved parts.

These are also the locations for where the software looks to apply dies and materials and where it looks to open existing parts.

Tolerances

  • Rotation Angle: Click on the drop down menu labeled "Rotation Angle:" Dragon Rotation Angle1.png and select the tolerance for how many decimal places the part's rotation angle will read by default.
  • Bend Angle: Click on the drop down menu labeled "Bend Angle:" Dragon Bend Angle1.png and select the tolerance for how many decimal places the part's bend angle will read by default.
  • Lengths: Click on the drop down menu labeled "Lengths:" Dragon Lengths1.png and select the tolerance for how many decimal places or fraction increments the part's length will read by default.

Unit of Measure

  • Inches: Select the "Inches" Dragon Inches1.png option and the part dimensions and information will appear in inches.
  • Millimeters: Select the "Millimeters" Dragon Millimeters1.png option and the part dimensions and information will appear in millimeters.

Auto-Save Frequency

  • Click on the "Auto-Save Frequency" Dragon Auto Save1.png drop down menu and select the amount of time it will take for the software to save your progress.

Input / Interface

  • Keyboard: Select the "Keyboard" Dragon Keyboard1.png option and the method in which you input your information will be constricted to your keyboard.
  • Touch Screen: Select the "Touch Screen" Dragon Touch Screen1.png option and the method in which you input your information will be constricted to your touch screen.

Undo/Redo

  • Number of Steps: Click the up and down arrows or key in a number into the "Number of Steps:" Dragon Number Of Steps1.png section to designate a number of undo or redo steps you can take when creating a design.

Misc Options

  • Invert Mouse Wheel Zoom: Check the "Invert Mouse Wheel Zoom" Dragon Invert Mouse Zoom1.png checkbox and the mouse's zoom function will become inverted (scroll up to zoom out/ scroll down to zoom in).
  • Disable Automatic Updates: Check the "Disable Automatic Updates" Dragon Disable Auto Updates1.png checkbox and the software will no longer attempt to update automatically.
  • Display Orientation Axis: Check the "Display Orientation Axis" Dragon Display Orientation Axis1.png checkbox and the orientation axis will be shown on the display screen.

Main Display

  • Normal: Click on the "Normal" Dragon Normal Display1.png option and the background in the display screen will be normal by default.
  • Custom Color:' Click on the "Custom Color" Dragon Custom Color Display.png option and choose a default color to assign to the background in the display screen.
  • Image: Click the "Image" Dragon Image Display1.png option and browse for a default picture to assign to the background in the display screen.

Output

Dragon Output Settings1.png

Rotation

The rotation settings control how rotation values are displayed in the results table. Rotation can be measured in incremental or absolute terms. Each rotation angle range can also be chosen.

  • Incremental: Select the "Incremental:" Dragon Options 8.png option and rotation angles will start from the end of the previous bend's rotation.
  • Absolute: Select the "Absolute:" Dragon Options 9.png option and rotation angles will always start from the very beginning of the angle scale.

Dragon Angle Scale1.png

  • Angle Scale: The rotation scale will determine what the rotation angles will range between. The rotation scale will show where the angle measurements begin and where they end. Choose a rotation scale by clicking on one of the scale options. The rotation scales available are 0 - 360, 360 - 0, (-180) - 180, and 180 - (-180). The 0 - 90 - 0 - 90 - 0 and 0 - 90 - 0 - 90 - 0 Reversed options will be added when the Absolute option is chosen.

Length/Location

The length/location setting will determine how the bend location will be calculated in the results table.

  • Distance from Start: Select the "Distance from Start" Dragon Distance From Start1.png option and bend locations will be measured from the starting edge of the tube.
  • Distance from End: Select the "Distance from End" Dragon Distance From End1.png option and bend locations will be measured from the ending edge of the tube.
  • Length of Straight Tube: Select the "Length of Straight Tube" Dragon Length Of Straight Tube1.png option and bend location values will be the amount of straight tube between each bend.
  • Table Location: Select the "Table Location" Dragon Table Location.png option and bend locations will be based on index table values. If this option is used, the "Offset Distance" Dragon Offset Distance1.png between the table and the bend will need to be supplied as well as scale "Table Length" Dragon Table Length1.png. Check the "Indexing Begins at Die" Dragon Indexing Begins At Die1.png option if the scale begins at the die.
  • Dimension Location: Dragon Dimension Location.png This option determines where the bend location marks will be placed in reference to the bend. Bend locations can be placed at the start, center, or end of each bend.

Misc Display Options

  • Display parentheses () for negative values: Check the "Display parentheses () for negative values" Dragon Disp Parentheses1.png checkbox and all negative values in the output results table will be surrounded by parentheses.
  • Display Degree Symbol: Check the "Display Degree Symbol" Dragon Disp Degree Symbol1.png checkbox and the degree symbol will be shown in the output results table.
  • Display Feet/Meters: Check the "Display Feet/Meters" Dragon Disp Feet Meters1.png checkbox and the lengths of each tube including overall lengths will be shown as feet or meters in the output results table.
  • Display Minutes/Seconds: Check the "Display Minutes/Seconds" Dragon Disp Minutes Seconds1.png checkbox and the minutes and/or seconds for fabrication time will be shown in the output results table.
  • Display Spring Angles: Check the 'Display Spring Angles" Dragon Disp Spring Angles1.png checkbox and the part's spring angles will be shown in the output results table.
  • Display Length of Bend: Check the "Display Length of Bend" Dragon Disp Length Of Bend1.png checkbox and the lengths of each bend on a part will be shown in the output results table.

Custom Part

Dragon Custom Part1.png

Defaults

  • Cut-Off Color: Select the color that will be assigned to the section of cut-off added to the part by clicking the color box next to the "Cut-Off Color:" Dragon Cut Off Color1.png heading.
  • Tri-Star Scale: Enter a value in the "Tri-Star Scale:" Dragon Tri Star Scale1.png text field to assign a size to the scale of the Tri-Star. 1=100% (Normal Size), 2=200% (Twice the Normal Size).
  • Dimension Size: Enter a value in the "Dimension Size:" Dragon Dimension Size1.png text field to assign a size to the dimensions shown on your parts. 1=100% (Normal Size), 2=200% (Twice the Normal Size).
  • Notes: Enter information about these settings in the "Notes:" Dragon Notes1.png text field.

Misc Custom Part Options

  • Reverse Rotation: Check the "Reverse Rotation" Dragon Reverse Rotation1.png checkbox to ensure that the rotation settings are shown in reverse.
  • Miter Dimension Location (Default): Select the "Miter Dimension Location (Default)" Drag Miter Dimension Default1.png drop down menu to select the default miter dimension location as it will appear in a custom part design. The options for this setting are Inside, Center and Outside dimensions.

Features to Display

These settings will determine the kind of features that will be displayed on the part model in any of the single part design interfaces. Click the check boxes next to the features you want to have shown.

  • Dimensions: Length measurement values will be displayed on the part lengths.
  • Cut-Off: If any cut-off is added to the part, it will be represented on the part display.
  • Apex Guides: For each bend, guidelines will extend from the part model to the verification points.
  • Tri-Star: The axis will be shown on the graphical display.
  • Verification Points: Points will be displayed at the apex of each bend.
  • Bend Highlight: The current bend will be highlighted in red on the 3D part model.

Cut-Off

  • The default cut-off start and end values can be defined here. Each new part will automatically have these cut-offs initially applied.

CAD

Dragon CAD1.png

Dimensions

  • Text Size: Enter the default text size for when you create dimensions within a project. This will be set to 1 be default.
  • Ext. Offset: Enter the distance that straight extensions will protrude from placed dimensions. This will be set to 0 by default.
  • Ext. Standoff: Enter the distance from the dimension points that straight sections will start from. This will be set to 0 by default.
  • Arrow Width: Enter the width of your arrows for placed dimensions. This will be set to 0.5 by default.
  • Arrow Length: Enter the length of your arrows for placed dimensions. This will be set to 1 by default.
  • Arrow Type: Choose the arrow type for placed dimensions. Options are None, Single, Double, Closed, and Solid. This will be set to Double by default.
  • Angle Tolerance: Choose how specific your angle dimensions will read out when placed. This will be set to 'n' by default.
  • Tolerance: Choose the tolerance of either fractions or decimals for your horizontal, vertical and linear placed dimensions. This will be set to 'Fraction n/16' by default.

Holes - Default Values

  • Round Select the Round option and you will be able to adjust the default width of round holes in the corresponding Width: value field. This will be set to 1 by default.
  • Square Select the Square option and you will be able to adjust the default width, angle and corner radius of square holes in the corresponding Width:, Angle: and Corner Radius:' value fields. These will be set to 1, 0 and 0 by default.
  • Rectangle Select the Rectangle option and you will be able to adjust the default width, angle, height and corner radius of rectangular holes in the corresponding Width:, Angle:, Height: and Corner Radius: value fields. These will be set to 1, 0, 2 and 0 by default.
  • Oval Select the Oval option and you will be able to adjust the default width, angle and height of oval holes in the corresponding Width:, Angle: and Height: value fields. These will be set to 1, 0 and 2 by default.
  • Ellipse Select the Ellipse option and you will be able to adjust the default width, angle and height of ellipse holes in the corresponding Width:, Angle: and Height: value fields. These will be set to 1, 0 and 2 by default.

Drawing Weight

This section will determine the thickness of lines for each of the categories included.

  • Material: Enter the material drawing weight here. This will be set to 1 by default.
  • Points: Enter the points drawing weight here. This will be set to 1 by default.
  • Lines: Enter the lines drawing weight here. This will be set to 1 by default.
  • Holes: Enter the holes drawing weight here. This will be set to 1 by default.
  • Text: Enter the text drawing weight here. This will be set to 1 by default.
  • Dimensions: Enter the dimension drawing weight here. This will be set to 1 by default.
  • Marking: Enter the marking drawing weight here. This will be set to 2 by default.
  • Etching: Enter the etching drawing weight here. This will be set to 2 by default.
  • Cutting: Enter the cutting drawing weight here. This will be set to 3 by default.

Abbreviations

This section is for setting up your abbreviations for holes made in Dragon's designer. These will be shown when you dimension the holes on the project.

  • Round: Enter the abbreviation for round holes in the text field here. This will be set to Rd. by default.
  • Square: Enter the abbreviation for square holes in the text field here. This will be set to Sq. by default.
  • Rectangle: Enter the abbreviation for rectangle holes in the text field here. This will be set to Rect. by default.
  • Oval: Enter the abbreviation for oval holes in the text field here. This will be set to Ov. by default.
  • Ellipse: Enter the abbreviation for ellipse holes in the text field here. This will be set to Elps. by default.

Colors

This section is for setting colors to the different actions and lines that will appear in your design.

  • Marking Set the color that will indicate marking here. This will be set to green by default.
  • Etching Set the color that will indicate etching here. This will be set to purple by default.
  • Cutting Set the color that will indicate cutting here. This will be set to dark red by default.
  • Tube Edge Set the color that will indicate the tube edge here. This will be set to dark pink by default.
  • Lead-in Set the color that will indicate the plasma lead-in here. This will be set to red by default.
  • Lead-Out Set the color that will indicate the plasma lead-out here. This will be set to pink by default.
  • Points Set the color that will indicate points here. This will be set to black by default.
  • Lines Set the color that will indicate lines here. This will be set to black by default.
  • Text Set the color that will indicate text here. This will be set to gray by default.
  • Holes Set the color that will indicate holes here. This will be set to gray by default.
  • Dimension Lines Set the color that will indicate dimension lines here. This will be set to black by default.
  • Dimension Ext Set the color that will indicate dimension extension lines here. This will be set to black by default.
  • Dimension Text Set the color that will indicate dimension text here. This will be set to black by default.

Text

This section is for setting up your text defaults.

  • Size: Enter the size of your text here. This will be set to 1 be default.
  • Spacing: Enter the gap of your text spacing here. This will be set to 1 be default.
  • Text Quality: Choose the visual quality of your text here. This will be set to Normal be default.
  • Font Family: Choose the font used with your text here. This will be set to Arial be default.

Miscellaneous Options

This section is for setting up displayed imaging.

  • Display XY Axis Checking the "Display XY Axis" check box will show the XY axis in any Dragon interface.
  • XY Axis Scale Enter the intended height of the XY axis that will appear in the design display screen.
  • Prompt for Action Names

Simulation

Simulation Dragon Options1.png

This section is where you will set up your default settings for bending simulation.

  • Travel Speed: Set the speed of travel during a bend simulation here. This will be set to 2 by default.
  • Bending Speed: Set the speed of bending during a bend simulation here. This will be set to 5 by default.
  • Rotation Speed: Set the speed of rotation during a bend simulation here. This will be set to 5 by default.
  • Animation Speed: Set the speed of animation during a bend simulation here. This will be set to 5 by default.
  • Bender: Set your style of bender during a bend simulation here. This will be set to Rotary Draw - Clockwise by default.
  • Quality: Set your visual quality during a bend simulation here. This will be set to Best by default.
  • POB Bracket Color: Set your POB bracket color during a bend simulation here. This will be set to gray by default.





Misc

Misc Dragon Options1.png

Mach Settings

  • Program Location: Set the location of your Mach program by either entering the path location in the text field or browsing for it by clicking the Browse button.

Advanced Debugging

These advanced debugging options should only be altered under the direction of a Bend-Tech support technician.

Calculations

  • Rounding Precision This value represents the number of decimal points that the software will round off by in cases when numbers are rounded.

Miscellaneous Options

  • Trim Scrap Material (Import Only) Check this check box if you'd like all imported parts to be trimmed of their excess material. (Recommended)
  • Use Advanced Shift Logic Check this check box to engage the new shift control logic which will unlock new functionality. This button is set to be phased out as the advanced shift logic becomes a normal part of the software. For older versions that have this option available, keep this check box checked. NOTE:It is checked by default in most versions of the software.
  • Prompt to Select Machine Check this check box and the software will prompt you to select a machine at the start of any new project or nest.
  • Allow Use of Uncalibrated Machines Check this check box to allow for the selection of uncalibrated machines when starting any new project or nest. This is not highly recommended by Bend-Tech staff and technicians, but we understand that there may be a need for it at times.

Material Sort Fields

  • These are user defined sorting tools for use in the Tube/Pipe (material) Library in order to sort materials by metal type, composition, supplier, etc. The Library will reflect this change by adding a field that the user can use to sort their materials by.

Part ID Overrides

  • Skip if Part is Shorter than: Enter a value in this field and the software will not add a part ID marking or engraving if the length is shorter than this value.
  • Skip if Length is Greater than: Enter a value in this field and the software will not add a part ID marking or engraving if the length is greater than this percentage value.