Dynatorch Dragon Guide

From Bend-Tech 7x Wiki
Revision as of 14:43, 6 March 2017 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Dynatorch Dragon Guide

Overview

After receiving the Dragon software, all users will have to register the product with their personal identification along with a Dragon Serial number and Keycode (provided).

Registration1.png

Upon initial startup, the software will display a splash screen and open to the Dragon Task Menu. Here, you will have the options from the Main Menu Bar above along with creating straight parts with the Straight Part coping designer.

Dyna Dragon Menu1.png

We first advise you to enter material information into the Tube Library (located to the right of the Task Menu screen) in order to designate what material you will be working with on a particular job. Only after a material is added to the Tube Library can you create a part in the Straight Part coping designer.

Tube Library2.png

Machine Settings

We recommend watching the video at the link below in order to understand what material settings should be applied for a typical entry. This has proven to be very helpful to many of our customers.

NOTE: Machine Settings for Dynatorch users will not include the same options for Dragon machine owners. Your settings will only include the following options:

  • Kerf Width
  • Minimum Web
  • Default (stock) Length
  • Cutting Overlap
  • Cutting Height
  • Pierce Height
  • Cutting Feed Rate
  • Rotation RPM

These settings can be found in your cut charts in your torch manual... Any Thermal Dynamics torch inquiries will be re-directed to the Thermal Dynamics manufacturer as we do not offer technical support on their hardware.

Material Machine Settings Video

Standard Material Machine Settings