Fillet (Arc)

From Bend-Tech 7x Wiki
Revision as of 13:56, 6 June 2014 by Fabcam1 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Current Item:

Plate -- Create -- Arc -- Fillet
Fillet(Arc).jpg

Description

Adds a partial arc in order to round interior corners.

How-To

Input the desired radius of the fillet arc into the Radius field. Click on the first line, which will turn blue. A blue arc will come off the first line and connect with whatever line is nearest to the cursor. Change the direction of the fillet by moving the cursor to the other side of the first line. Click to place the fillet. If Auto-Trim is checked, any part of either line that extends past the fillet will be cut off.