Finding the Cut Length and Bending info. for a Part

From Bend-Tech 7x Wiki

Revision as of 13:54, 5 June 2014 by Fabcam1 (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to: navigation, search

Use the "Parts" tab. Select the part from the list and then use the "Send to XYZ" or "Custom 3D" buttons. This will transfer the part for manufacturing details.

CutLengthBendInfo.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Finding_the_Cut_Length_and_Bending_info._for_a_Part&oldid=887"