I use the same Die for 2 Different Materials

From Bend-Tech 7x Wiki
Revision as of 08:55, 6 October 2015 by Fabcam1 (talk | contribs) (Created page with "I use the same die for 2 different materials. In many cases your calibration will be different so you will want to set up a second die in your library. Here is an idea how to...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

I use the same die for 2 different materials.

In many cases your calibration will be different so you will want to set up a second die in your library. Here is an idea how to label:

1.75 x 6.00 DOM 1.75 x 6.00 HREW

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=I_use_the_same_Die_for_2_Different_Materials&oldid=5885"