Hotkeys

From Bend-Tech 7x Wiki
Revision as of 09:06, 2 May 2016 by Fabcam1 (talk | contribs) (Rotate Design)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is a list of Hotkeys, or commands that will cause actions in Bend-Tech by keying in letters on your keyboard.


Options

Ctrl.jpgO.jpg

  • Clicking CTRL + O will open the Options menu.

Save

Ctrl.jpgS.jpg

  • Clicking CTRL + S will open the window where you can save your current project.

Copy/Close

Ctrl.jpgC.jpg

  • Clicking CTRL + C will copy a part, feature or entity to your clipboard. (Availability for this function is limited)
  • In all other cases when CTRL + C cannot be used, it will serve as the Close function and will close the current window.

Paste

Ctrl.jpgV.jpg

  • Clicking CTRL + V will paste a part, feature or entity to your design. (Availability for this function is limited)

Undo

Ctrl.jpgZ.jpg

  • Clicking CTRL + Z will undo your last action. (This function is limited to 10 moves by default)

Redo

Ctrl.jpgY.jpg

  • Clicking CTRL + Y will redo your last undo action. (This function is limited to 10 moves by default)

Zoom In/Out

Plus1.pngMinus1.png

  • Clicking Plus/Equal will zoom in on the display and Minus/Underscore will zoom out on the display.

Rotate Design

Space Bar1.png

  • Clicking the Space Bar when your cursor is located in the display screen will allow you to rotate the part with your mouse. Click the space bar a second time to stop rotation.

Navigate Tabs

Left Arrow.jpgRight Arrow.jpg

  • Clicking the Left and Right Arrows will navigate tabs when a tab is selected.

Apply Pickpoints

Shift.jpgClick.png

  • Clicking the Left Mouse Button while holding the SHIFT' key will place and apply a Pickpoint in the Assembly interface.