Difference between revisions of "CAD to CAM Part Transfer"

From Bend-Tech 7x Wiki
Jump to: navigation, search
Line 6: Line 6:
  
 
'''From a single part designer:''' (i.e. Template, Custom Part, Custom 3D Part, Harpoon 3D, Sketch 2D, Sketch 3D, XYZ Part, Reverse Design.)
 
'''From a single part designer:''' (i.e. Template, Custom Part, Custom 3D Part, Harpoon 3D, Sketch 2D, Sketch 3D, XYZ Part, Reverse Design.)
 +
 
Simply make sure that your part was designed correctly and then click on the '''Transfer''' button at the top of screen and select the '''Dragon CAM''' option. There is no need to specifically select a part this way because there is only one. Assemblies are an exception because you must differentiate between which tubes you'd like to transfer.
 
Simply make sure that your part was designed correctly and then click on the '''Transfer''' button at the top of screen and select the '''Dragon CAM''' option. There is no need to specifically select a part this way because there is only one. Assemblies are an exception because you must differentiate between which tubes you'd like to transfer.
  
 
'''From Assembly:'''
 
'''From Assembly:'''
 +
 
If you'd like a single part transferred from Assembly to Dragon CAM, you must first be in the '''Parts''' tab, then you will select the part from the list, click on the '''Transfer''' button at the top of screen and select the '''Dragon CAM''' option.
 
If you'd like a single part transferred from Assembly to Dragon CAM, you must first be in the '''Parts''' tab, then you will select the part from the list, click on the '''Transfer''' button at the top of screen and select the '''Dragon CAM''' option.
  

Revision as of 14:56, 24 August 2016

  • While transferring any design from Bend-Tech CAD to Dragon CAM, please follow the process below.

1. First, make sure that the parts you'd like to transfer are completed and selected in the correct manner.

CAD 2 CAM Transfer1.png

From a single part designer: (i.e. Template, Custom Part, Custom 3D Part, Harpoon 3D, Sketch 2D, Sketch 3D, XYZ Part, Reverse Design.)

Simply make sure that your part was designed correctly and then click on the Transfer button at the top of screen and select the Dragon CAM option. There is no need to specifically select a part this way because there is only one. Assemblies are an exception because you must differentiate between which tubes you'd like to transfer.

From Assembly:

If you'd like a single part transferred from Assembly to Dragon CAM, you must first be in the Parts tab, then you will select the part from the list, click on the Transfer button at the top of screen and select the Dragon CAM option.

If you'd like the entire Assembly transferred to Dragon CAM, you must be anywhere in Assembly Except the Parts tab, then you will click on the Transfer button at the top of screen and select the Dragon CAM option.

In any case, after selecting the Dragon CAM option from the Transfer menu, the Dragon CAM software will open and a window will appear prompting you to apply a material available from Dragon and which designer you would like to transfer these parts to.

CAD CAM Trans1.png

2.