Bend-Tech Articles

Help Articles

General
Finding and Opening Old Part Files Importing Old Data Libraries Bend-Tech SW Module Installation

Assembly
Creating PickPoints using Angle & Plane My Bent Part Doesn't Follow my PickPoints PickPoints - Single PickPoints - 2 Points PickPoints - Plane PickPoints - Arc Remove PickPoint Create a Bent Part Using Tangent for Bent Part Paste Part Creating a Straight Part Creating a Horizontal, Vertical, or Linear Dimension	Creating an Angle Dimension Changing the Text of a Dimension Moving a Dimension Removing or Deleting a Dimension Dimensioning - Setting/Changing Defaults Dimensioning - Views are Overlapping Creating a bmp, jpg, gif, etc... Settings Projection Paste Part is Attached to the Wrong End Mirror a Part Loading a Part into Assembly	Changing the Color of a Part Changing the Material or Die of a Part Changing the Current Material & Die Changing a "Part" Name Changing a "Master" Part Name Deleting or Removing a Part Moving a Part Moving a Feature Important Issues to Know About Assembly Finding the Cut Length and Bending info. for a Part Using the Cutting Plane Function

Assembly Cutting
Finding the Length to cut all the Straight Parts Cutting a Tube to Multiple Tubes Cutting the End of a Part	Hole Saw/Mill vs. Plasma/Grinder Cutting a Tube to a Tangent of a Bend	Cutting the End of a Straight Tube Line Up the Templates

Results
Dimension Location Rotation Decimal & Fraction	How to Mark and Run the Material through the Die Using an Angle Level	Bend Angle & Spring Angle Dial Level use for Rotation

Material & Tooling
Die Edge What does the * (Asterisk) Mean in a Formula Changing the Radius for only 1 Bend	Using Spring Charts My Software only came with 1 Tool and 1 Material I use the same Die for 2 Different Materials	Where do I find the Menu to add Material/Tooling? Start using Assembly without Calibrating my Die? My Material or Tooling Library won't Update

Templates
The Template Entry Boxes are Black	Railing Templates	My Part isn't coming out with the Dimensions I entered

Custom Part
Must have some Straight Lengths at Both Ends How do I have a 180 degree Bend? What is Apex? Custom Part uses the Center Line!	Make a 3D Part in Custom 3D Part Start Angle? I know the Straight Leg Lengths, Angles, and Rotations	How can the Material Bend the Other Direction? Apex vs. Tangent New Rise & Run Feature

Custom 3D
Making a 180 Degree Bend in Custom 3D I know the Bend Angle and Length How to Make a Stinger Example 1 (90 Degree Bends)	Example 2 (Under 90 Degree Bends) Example 3 (Over 90 Degree Bends) Example 4 (90 Degree Bends, Move in 2 Directions)	Example 5 (Under 90 Degree bends, Move in 3 Directions) Rules of Custom 3D Understanding the "Tri-Star"

XYZ
Creating a Double-Beveled Hoop Using Mirroring Using the Mirror Function Finding Values with only the Bend Angle and Length	Making a 180 Degree Bend in XYZ XYZ Example 1 (90 Degree Bends) XYZ Example 2 (Under 90 Degree Bend)	XYZ Example 3 (Over 90 Degree Bends) XYZ Example 4 (90 Degree Bends, Move in 2 Directions) XYZ Example 5 (Under 90 Degree Bends, Move in 3 Directions)

Calibration
What is Bend Location Offset? What is Calibrated CLR?	What is CLR?	Calibration - What Should I Use; Book or Button?

Simulation
Bend Order Simulation Transitions	The Simulation Viewer Buttons Preset Bend Order Buttons

Import
Importing Files Importing a DXF File	Exporting a DXF File	Importing a STEP or IGES File

Sheet Metal/Plate
Copy and Paste Flanges Creating a Flat DXF File From a Bent Part Transferring a SM Part Into a Tube Project	Bridging