Dragon Bent Part Tutorial
Dragon Bent Part Tutorial 
Things To Know
- This tutorial will step you through the process of creating a bent part design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.
Tutorial
1. From the Bend-Tech Dragon start up screen, click on the Bent .png)
button to open the bent part interface.
2. Now, maximize the screen 
.
3. Next, enter the values in the LRA value fields to the left according to the picture shown below.
