Dragon Custom Design Tutorial

From Bend-Tech 7x Wiki
Revision as of 13:07, 22 January 2016 by Fabcam1 (talk | contribs)
Jump to: navigation, search
Dragon Custom Design Tutorial
Drag Cust Design1.png

Things To Know

  • This tutorial will step you through the process of creating geometry on a straight design in Bend-Tech Dragon and show you the possible choices for where to take it next depending on your needs. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.

Tutorial

1. Start by opening the file saved from the Dragon Straight Part Tutorial labeled Dragon Test1. If you have not completed the Dragon Straight Part Tutorial, please do so before continuing any further.

2.

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_Custom_Design_Tutorial&oldid=6817"