Difference between revisions of "PickPoints - Plane"

From Bend-Tech 7x Wiki
Jump to: navigation, search
(Created page with " This thread will cover creating a PickPoint with the Plane method. The idea of PickPoint Plane is to cover the scenario of wanting a point an exact distance away from a base...")
 
 
(One intermediate revision by the same user not shown)
Line 12: Line 12:
 
'''Z Plane:'''
 
'''Z Plane:'''
  
[[File:Plane1.gif]]
+
[[File:Plane1.jpg]]
  
  
 
'''Y Plane:'''
 
'''Y Plane:'''
  
[[File:Plane2.gif]]
+
[[File:Plane2.jpg]]
  
  
 
'''X Plane:'''
 
'''X Plane:'''
  
[[File:Plane3.gif]]
+
[[File:Plane3.jpg]]
  
  
Line 29: Line 29:
 
Note: This a 3 view print.
 
Note: This a 3 view print.
  
[[File:Plane4.gif]]
+
[[File:Plane4.jpg]]
  
  
Line 36: Line 36:
 
Lets get started.
 
Lets get started.
  
Step 1) Select the "PickPoint" tab and the "Plane/Arc" tab within it.
+
'''Step 1:''' Select the "PickPoint" tab and the "Plane/Arc" tab within it.
  
Step 2) Select the "X Plane" option. Note: This select can be made at anytime.
+
'''Step 2:''' Select the "X Plane" option. Note: This select can be made at anytime.
  
Step 3) Click the "Set Reference" button then select the base "PickPoint". This point does not need to be in the plane (it can be), you just need to know the distance from this point.
+
'''Step 3:''' Click the "Set Reference" button then select the base "PickPoint". This point does not need to be in the plane (it can be), you just need to know the distance from this point.
  
[[File:Plane5.png|700px]]
+
[[File:Plane5.jpg|700px]]
  
  
  
Step 4) Select the 2 "PickPoints" representing the line that will intersect your plane. Note: These selections can not be the same as the base PickPoint that was selected in Step 3.
+
'''Step 4:''' Select the 2 "PickPoints" representing the line that will intersect your plane. Note: These selections can not be the same as the base PickPoint that was selected in Step 3.
  
[[File:Plane6.png|700px]]
+
[[File:Plane6.jpg|700px]]
  
  
  
Step 5) Enter in the "'''Move Amount'''" Distance value from the base point. In our case it is "'''7'''".
+
'''Step 5:''' Enter in the "'''Move Amount'''" Distance value from the base point. In our case it is "'''7'''".
  
Step 6) If the purple point looks to be in a good location, select the "'''Apply'''" command button.
+
'''Step 6:''' If the purple point looks to be in a good location, select the "'''Apply'''" command button.
  
[[File:Plane7.png|700px]]
+
[[File:Plane7.jpg|700px]]
  
  
 
'''NOTE: The delta distance entered does not need to rest between the 2 points selected for the line. As you can see in the following picture the value of 2 was entered and the point falls off the end of the line.'''
 
'''NOTE: The delta distance entered does not need to rest between the 2 points selected for the line. As you can see in the following picture the value of 2 was entered and the point falls off the end of the line.'''
  
[[File:Plane8.png|700px]]
+
[[File:Plane8.jpg|700px]]

Latest revision as of 09:06, 30 September 2015

This thread will cover creating a PickPoint with the Plane method.

The idea of PickPoint Plane is to cover the scenario of wanting a point an exact distance away from a base point and you don't know where the point will intersect the line.


This method locates a point at the intersection of a plane and a line.

Direction of the Plane: The plane resides in 1 of 3 directions; Z, Y & X.


Z Plane:

Plane1.jpg


Y Plane:

Plane2.jpg


X Plane:

Plane3.jpg


In our example shown here we want a point on a line 7 inches away from our part (select a point on the part). We don't know the height or the left to right locations, we just want it on the line 7 inches back from the part. Note: This a 3 view print.

Plane4.jpg



Lets get started.

Step 1: Select the "PickPoint" tab and the "Plane/Arc" tab within it.

Step 2: Select the "X Plane" option. Note: This select can be made at anytime.

Step 3: Click the "Set Reference" button then select the base "PickPoint". This point does not need to be in the plane (it can be), you just need to know the distance from this point.

Plane5.jpg


Step 4: Select the 2 "PickPoints" representing the line that will intersect your plane. Note: These selections can not be the same as the base PickPoint that was selected in Step 3.

Plane6.jpg


Step 5: Enter in the "Move Amount" Distance value from the base point. In our case it is "7".

Step 6: If the purple point looks to be in a good location, select the "Apply" command button.

Plane7.jpg


NOTE: The delta distance entered does not need to rest between the 2 points selected for the line. As you can see in the following picture the value of 2 was entered and the point falls off the end of the line.

Plane8.jpg