Difference between revisions of "Dragon Nesting Tutorial"
| Line 12: | Line 12: | ||
[[File:Open_File_Drag2.png]][[File:Dragon_Open_As2.png]] | [[File:Open_File_Drag2.png]][[File:Dragon_Open_As2.png]] | ||
| − | 2. | + | |
| + | 2. With the Custom Design window open, maximize the screen [[File:Min_Max_Close_Tab.png]] and click on the '''Transfer to Nesting''' [[File:Drag_Transfer_To_Nesting1.png]] drop down menu at the top of the screen and select the '''New Project''' option. | ||
| + | |||
| + | [[File:New_Nesting_Proj1.png]] | ||
| + | |||
| + | |||
| + | 3. | ||
Revision as of 13:55, 27 January 2016
Dragon Nesting Tutorial 
Things To Know
- This tutorial will step you through the process of creating a nesting project in Bend-Tech Dragon and show you how simple it is to send your project to your Dragon machine. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.
If you have not completed the Dragon Straight Part Tutorial and Dragon Custom Design Tutorial, please do so before continuing any further.
Tutorial
1. Start by opening the Bend-Tech Dragon software and opening the file saved from the Dragon Custom Design Tutorial labeled Dragon Test2. Do this by selecting File - Open - Dragon Design from the top left of the window, selecting the file, then clicking the Open button.
2. With the Custom Design window open, maximize the screen 
and click on the Transfer to Nesting File:Drag Transfer To Nesting1.png drop down menu at the top of the screen and select the New Project option.
3.
