Dragon A400 Side Offsets Calibration

From Bend-Tech 7x Wiki
Revision as of 13:00, 6 October 2017 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Dragon A400 Side Offsets Calibration

This calibration is meant for Dragon A400 users experiencing differences in cutting height due to warped or imperfect square and rectangular tubing.

1. If you require a way to calibrate your warped or imperfect tubing, the option is here for you located in the Tube/Pipe Library under the Advanced tab.


Side Offsets Calib1.png

Side Offsets Calib2.png


2. In the Advanced tab, select the Calibration option under the Side Offsets section at the bottom of the window.


Side Offsets Calib3.png


3. The calibration window will appear and instruct you to make sure your chuck/machine has been homed/referenced before continuing.


Side Offsets Calib4.png

Side Offsets Calib5.png

Side Offsets Calib6.png

Side Offsets Calib7.png

Side Offsets Calib8.png

Side Offsets Calib9.png

Side Offsets Calib10.png

Side Offsets Calib11.png

Side Offsets Calib12.png

Side Offsets Calib13.png

Side Offsets Calib14.png

Side Offsets Calib15.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_A400_Side_Offsets_Calibration&oldid=8897"