Dragon Diamond Notch Bridging Tutorial

From Bend-Tech 7x Wiki
Revision as of 09:05, 3 October 2017 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Dragon Diamond Notch Bridging Tutorial

Things To Know

  • This tutorial will step you through the process of creating a straight design in Bend-Tech Dragon CAD, add a notch cutout and show you where to take it next in order to add a notch bridge . As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.



Tutorial

DNB1.png DNB2.png DNB3.png DNB4.png DNB5.png DNB6.png DNB7.png DNB8.png DNB9.png DNB10.png DNB11.png DNB12.png DNB13.png DNB14.png DNB15.png DNB16.png DNB17.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_Diamond_Notch_Bridging_Tutorial&oldid=8811"