Dragon Diamond Notch Bridging Tutorial

From Bend-Tech 7x Wiki
Revision as of 12:43, 3 October 2017 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Dragon Diamond Notch Bridging Tutorial

DNB1.png

Things To Know

  • This tutorial will step you through the process of creating a straight design in Bend-Tech Dragon CAD, add a notch cutout and show you where to take it next in order to add a notch bridge . As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.



Tutorial

1. Start by opening up the Bend-Tech Launcher on your computer and select the Dragon CAD option so we can start our design process.


DNB2.png


2. With the Task Menu screen open, select the Assembly designer option to begin drawing our part.


DNB3.png


3. Maximize the screen here and select the Pickpoints tab. We will now create a single Pickpoint to indicate the length of a single part.


DNB4.png

DNB5.png


4. Select the Right entry field and type 12 into it to indicate a 12 inch part.


DNB6.png


5. Click the Apply button to apply the point in the design.


DNB7.png


6.


DNB8.png

DNB9.png

DNB10.png

DNB11.png

DNB12.png

DNB13.png

DNB14.png

DNB15.png

DNB16.png

DNB17.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Dragon_Diamond_Notch_Bridging_Tutorial&oldid=8824"