Difference between revisions of "Dragon Nesting Tutorial"

From Bend-Tech 7x Wiki
Jump to: navigation, search
Line 45: Line 45:
  
  
9. Now, switch to the '''Shifts''' [[File:Drag_Nest_Shifts1.png]] tab
+
9. Now, switch to the '''Shifts''' [[File:Drag_Nest_Shifts1.png]] tab to see the shifts that the Dragon machine will take in fabricating this project.
 +
 
 +
[[File:Dragon_Nest_Shifts1.png]]
 +
 
 +
 
 +
10. From here, click on '''Shift 1''' at the top of the list to your left and click the '''Assign Actions''' [[File:Dragon_Assign_Actions1.png]] button below.

Revision as of 09:27, 28 January 2016

Dragon Nesting Tutorial
Drag Nesting1.png

Things To Know

  • This tutorial will step you through the process of creating a nesting project in Bend-Tech Dragon and show you how simple it is to send your project to your Dragon machine. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.

If you have not completed the Dragon Straight Part Tutorial and Dragon Custom Design Tutorial, please do so before continuing any further.

Tutorial

1. Start by opening the Bend-Tech Dragon software and opening the file saved from the Dragon Custom Design Tutorial labeled Dragon Test2. Do this by selecting File - Open - Dragon Design from the top left of the window, selecting the file, then clicking the Open button.

Open File Drag2.pngDragon Open As2.png


2. With the Dragon Design window open, click on the Transfer to Nesting Drag Transfer To-Nesting1.png drop down menu at the top of the screen and select the New Project option.

New Nesting Proj1.png


3. Now, maximize the screen Min Max Close Tab.png and enter 140 into the Stock Length: value field to the left of the display screen. The Web Size: should be set to 0.5 already by default.

Drag Nest Stock Length 140.pngDrag Nest Web Size 0 5.png


4. Next, to add parts to the nesting project, click on the Parts Drag Nest Parts Tab1.png tab.

5. Now, double click on our part five times to add 5 copies of it to our nesting design.

Drag Nest Stock Part1.pngDrag Nest Stock Part2.png


6. Still under the Parts tab, select the Move Dragon Move1.png button from the bottom of the screen followed by the second to the last part in the design. Then, drag this part the one on the end (tied to our part) near the end of the stock tube.

Drag Nest Stock Part3.png


7. Now, click the Rotate Dragon Rotate1.png button and rotate the last two parts in the design so that the holes cross over both the top and bottom edges of the unfolded tube.

Drag Nest Stock Part4.png


8. Next, click the Remove Dragon Remove2.png button and select these last two parts to delete them from the nesting design.

Drag Nest Stock Part5.png


9. Now, switch to the Shifts Drag Nest Shifts1.png tab to see the shifts that the Dragon machine will take in fabricating this project.

Dragon Nest Shifts1.png


10. From here, click on Shift 1 at the top of the list to your left and click the Assign Actions Dragon Assign Actions1.png button below.