Difference between revisions of "Offset Part"

From Bend-Tech 7x Wiki
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 36: Line 36:
 
There are two different types of offset available: 3 and 4 bend. See image below for what each of these offsets will look like.  
 
There are two different types of offset available: 3 and 4 bend. See image below for what each of these offsets will look like.  
  
[[File:offset_part_2.png]]
+
[[File:offset_part_2_1.png]]
  
  
Line 42: Line 42:
 
The section of the part where the offset will be placed can be chosen here. To choose a section, either enter a section number in the '''Section''' field or click the '''Pick''' button and select a section by clicking directly on it in the part display. The selected section will be highlighted in red.
 
The section of the part where the offset will be placed can be chosen here. To choose a section, either enter a section number in the '''Section''' field or click the '''Pick''' button and select a section by clicking directly on it in the part display. The selected section will be highlighted in red.
  
[[File:offset_part_3.png]]
+
[[File:offset_part_3_1.png]]
  
  
Line 65: Line 65:
  
  
:[[File:offset_part_7.png|600px]]
+
:[[File:offset_part_7_1.png]]
  
  

Latest revision as of 09:03, 11 September 2014

Bend-Tech 7x Wiki :: Offset Part

Offset part.png
Offset part 8.png


Parts can be sent to the Offset Part interface by using the Transfer menu Transfer.png and selecting the Offset Part option. New

Straight lengths of tube can also be brought into this interface clicking the File menu, select New, then select Offset Part. The total length and material of this section will need to be defined first.








Offset Part allows offset sections to be added to completed parts. These offsets will appear similar to the section in the image shown below.


Offset part 1.png


Material

The material used to create the current part can be chosen using the material menu. To choose a new material, click the material menu and select an option from the list. To view the Tube/Pipe Library, click the Library button.


Offset Style

There are two different types of offset available: 3 and 4 bend. See image below for what each of these offsets will look like.

Offset part 2 1.png


Affected Section

The section of the part where the offset will be placed can be chosen here. To choose a section, either enter a section number in the Section field or click the Pick button and select a section by clicking directly on it in the part display. The selected section will be highlighted in red.

Offset part 3 1.png


Distance to Offset

The offset's location can be defined as a distance from the start or end of the section to the center of the offset. Choose the starting point of the distance measurement (From Start or From End) and enter the distance value in the Distance to Center field. See image below for an example.

Offset part 4 1.png


Offset Size

The size of the offset can be defined here. The Horizontal Offset is the distance across the length of the tube that the offset spans. The Vertical Offset is the distance between the section and the top of the offset section. See image below.

Offset part 5.png


Details

  • Bend Dies: If the offset is a 4 bend offset, the first die will be applied to the first two bends and the second die will be applied to the second two bends. If the offset is a 3 bend offset, the first die will be applied to the first two bends and the second die will be applied to the third bend. To select a die, click either of the Bend Dies menus and select a die from the list.


Offset part 7 1.png


  • Side Length: The side length is the length of the left and right "legs" of the offset. See image below.
  • Top Length: The top length is only available for 4 bend offsets. This will be the length across the top of the offset. See image below.


Offset part 6.png


Generate

Click the Generate button Generate.png to generate a preview of the part with the offset section shown in the bottom display window. Check the Links Displays option to have the rotation of both part synchronized.

To send the part with the offset section to a part designer to get the bending instructions, to an assembly, etc. click the Transfer menu Transfer.png and select an option from the list.