Register SW Plugin

From Bend-Tech 7x Wiki
Revision as of 15:44, 22 September 2014 by Fabcam1 (talk | contribs)
Jump to: navigation, search

Bend-Tech 7x Wiki :: Main Menu Bar :: Tools :: Register SW Plugin


This is a quick guide to walk the user through registering SolidWorks within the Bend-Tech 7x software. This will allow the user to import files from SolidWorks into the Bend-Tech 7x program.

  • There are two ways to make sure that the SolidWorks program is registered with Bend-Tech:

1. If this window appears upon starting up Bend-Tech 7x, follow the steps upon start up. Register SW Plugin1.png


OR...

2. Register the program manually by going to Main Menu Bar --> Tools --> SW Plugin and selecting the Register button. Register SW Plugin2.png

3. With either procedure, the Register SW Plugin window will open. Register SW Plugin3.png

4. Under .NET Framework, choose the most recent version and highest bit driver option and select "Register" to continue.

5. The following window will open. Select "Yes" Register SW Plugin5.png

6. When the window asking if "you'd like to make changes to this computer", select "Yes".

Congratulations! You've successfully registered SolidWorks with Bend-Tech 7x. Register SW Plugin4.png

Retrieved from "http://www.bend-tech.net/wiki7/index.php?title=Register_SW_Plugin&oldid=3493"