Difference between revisions of "Dynatorch Nesting Tutorial"
(→Tutorial) |
|||
| (7 intermediate revisions by the same user not shown) | |||
| Line 8: | Line 8: | ||
==Tutorial== | ==Tutorial== | ||
| − | 1. Start by opening the Bend-Tech Dragon software and opening the file saved from the [[ | + | 1. Start by opening the Bend-Tech Dragon software and opening the file saved from the [[Dynatorch Custom Design Tutorial]] labeled '''Dragon Test2'''. Do this by selecting '''File - Open - Dragon Design''' from the top left of the window, selecting the file, then clicking the '''Open''' button. |
[[File:Open_File_Drag2.png]][[File:Dragon_Open_As2.png]] | [[File:Open_File_Drag2.png]][[File:Dragon_Open_As2.png]] | ||
| Line 20: | Line 20: | ||
3. Now, maximize the screen [[File:Min_Max_Close_Tab.png]] and enter '''140''' into the '''Stock Length:''' value field to the left of the display screen. Also, set the '''Quantity''' to '''1'''. The '''Web Size:''' should be set to '''0.5''''' | 3. Now, maximize the screen [[File:Min_Max_Close_Tab.png]] and enter '''140''' into the '''Stock Length:''' value field to the left of the display screen. Also, set the '''Quantity''' to '''1'''. The '''Web Size:''' should be set to '''0.5''''' | ||
| − | [[File: | + | [[File:Drag_Nest_Stock_Length_252.png]][[File:Drag_Nest_Web_Size_0_5.png]] |
| Line 27: | Line 27: | ||
5. Next, to add parts to the nesting project, click on the '''Parts''' [[File:Drag_Nest_Parts_Tab1.png]] tab. | 5. Next, to add parts to the nesting project, click on the '''Parts''' [[File:Drag_Nest_Parts_Tab1.png]] tab. | ||
| − | 6. Now, double click on our part ''' | + | 6. Now, double click on our part '''ten''' times to add 10 copies of it to our nesting design, or simply click the blue addition symbol [[File:blueaddsign.png]] to fill the stock length. |
| − | [[File: | + | [[File:Dyna_Nest_Stock_Part1.png]][[File:Dyna_Nest_Stock_Part2.png]] |
7. Still under the '''Parts''' tab, select the '''Move''' [[File:Dragon_Move1.png]] button from the bottom of the screen followed by the second to the last part in the design. Then, drag this part the one on the end (tied to our part) near the end of the stock tube. | 7. Still under the '''Parts''' tab, select the '''Move''' [[File:Dragon_Move1.png]] button from the bottom of the screen followed by the second to the last part in the design. Then, drag this part the one on the end (tied to our part) near the end of the stock tube. | ||
| − | [[File: | + | [[File:Dyna_Nest_Stock_Part3.png]] |
8. Now, click the '''Rotate''' [[File:Dragon_Rotate1.png]] button and rotate the last two parts in the design so that the two oval holes cross over both the top and bottom edges of the unfolded tube. | 8. Now, click the '''Rotate''' [[File:Dragon_Rotate1.png]] button and rotate the last two parts in the design so that the two oval holes cross over both the top and bottom edges of the unfolded tube. | ||
| − | [[File: | + | [[File:Dyna_Nest_Stock_Part4.png]] |
9. Next, click the '''Remove''' [[File:Dragon_Remove2.png]] button and select these last two parts to delete them from the nesting design. | 9. Next, click the '''Remove''' [[File:Dragon_Remove2.png]] button and select these last two parts to delete them from the nesting design. | ||
| − | [[File: | + | [[File:Dyna_Nest_Stock_Part5.png]] |
| − | 10. Now, switch to the '''Shifts''' [[File:Drag_Nest_Shifts1.png]] tab to see the shifts that | + | 10. Now, switch to the '''Shifts''' [[File:Drag_Nest_Shifts1.png]] tab to see the shifts that your machine will take in fabricating this project. |
| − | [[File: | + | [[File:Dyna_Nest_Shifts1.png]] |
| − | 11. From here, click on the first oval hole [[File: | + | 11. From here, click on the first oval hole [[File:dyna_shift_first_oval.png]] near the top of the list to your left and click the '''Unassign Action''' [[File:Dragon_Assign_Actions1.png]] button below. The contours for the hole will be removed from the shift in the display area and the listed item will be moved to the bottom under the Un-Assigned Actions section. |
*'''Note: Unassigning an action in the shift will cause the Dragon machine to ignore the action entirely, but it can always be placed back in the list of assigned actions simply by dragging it back in the list. Clicking the Delete Action [[File:Dragon_Delete3.png]] button will remove the action from the file completely.''' | *'''Note: Unassigning an action in the shift will cause the Dragon machine to ignore the action entirely, but it can always be placed back in the list of assigned actions simply by dragging it back in the list. Clicking the Delete Action [[File:Dragon_Delete3.png]] button will remove the action from the file completely.''' | ||
| − | 12. Once you are satisfied with the order of actions within the shift, all that is left to do is select the '''" | + | 12. Once you are satisfied with the order of actions within the shift, all that is left to do is select the '''"Make Program File"''' [[File:Make_Program_File1.png]] button at the top of the screen. |
| + | |||
| + | '''This will send all of this information to an .NC file available for use in your 3rd party software.''' | ||
Latest revision as of 10:43, 11 March 2017
Things To Know
- This tutorial will step you through the process of creating a nesting project in Bend-Tech Dragon and show you how simple it is to send your project to your Dragon machine. As you walk through this tutorial, procedures are designed based on your knowledge of earlier procedures. Because of this, it is very important that you carefully step through this guide, understanding everything along the way.
If you have not completed the Dragon Straight Part Tutorial and Dynatorch Custom Design Tutorial, please do so before continuing any further.
Tutorial
1. Start by opening the Bend-Tech Dragon software and opening the file saved from the Dynatorch Custom Design Tutorial labeled Dragon Test2. Do this by selecting File - Open - Dragon Design from the top left of the window, selecting the file, then clicking the Open button.
2. With the Dragon Design window open, click on the Transfer to Nesting 
drop down menu at the top of the screen and select the New Project option.
3. Now, maximize the screen 
and enter 140 into the Stock Length: value field to the left of the display screen. Also, set the Quantity to 1. The Web Size: should be set to 0.5
4. Now click the Apply 
button to set the stock tube length in the display area to the right.
5. Next, to add parts to the nesting project, click on the Parts 
tab.
6. Now, double click on our part ten times to add 10 copies of it to our nesting design, or simply click the blue addition symbol 
to fill the stock length.
7. Still under the Parts tab, select the Move 
button from the bottom of the screen followed by the second to the last part in the design. Then, drag this part the one on the end (tied to our part) near the end of the stock tube.
8. Now, click the Rotate 
button and rotate the last two parts in the design so that the two oval holes cross over both the top and bottom edges of the unfolded tube.
9. Next, click the Remove 
button and select these last two parts to delete them from the nesting design.
10. Now, switch to the Shifts 
tab to see the shifts that your machine will take in fabricating this project.
11. From here, click on the first oval hole 
near the top of the list to your left and click the Unassign Action 
button below. The contours for the hole will be removed from the shift in the display area and the listed item will be moved to the bottom under the Un-Assigned Actions section.
- Note: Unassigning an action in the shift will cause the Dragon machine to ignore the action entirely, but it can always be placed back in the list of assigned actions simply by dragging it back in the list. Clicking the Delete Action
button will remove the action from the file completely.
12. Once you are satisfied with the order of actions within the shift, all that is left to do is select the "Make Program File" 
button at the top of the screen.
This will send all of this information to an .NC file available for use in your 3rd party software.
