Copy

From Bend-Tech 7x Wiki
Jump to: navigation, search

Bend-Tech 7x Wiki :: Assembly :: Edit :: Copy

Edit copy.png



Copy Single Part

Click the Select Part button Select part.png to copy and paste a single part to a new location.

First, select the part that will be copied. Next, choose a PickPoint to be the anchor point for the part. This point will be used as the "handle" to drag it to the new location. Last, click on the new location point to place the part.


Edit copy 1.png







Copy Multiple Parts

Use the Copy Multiple Parts tools to copy and paste a specified group of parts or points to a new location.

First, click the Set Base Point button Set base.png to define the anchor point of the part/point group. This will be used as the point to attach the group to the new location point.

Next, select the points or parts that will be copied by clicking on them. Once selected, a part/point will be highlighted in red. Be sure to specify which kind of features will be copied by choosing the Parts or PickPoints option. Click the Clear All button to clear all selections. Click the Select All button to select all of parts or points currently in the assembly design. Click the Complete button Complete.png to indicate that all the desired parts have been selected.

Last, click the Paste Parts button Paste parts.png and select the new location point to place the parts.


Edit copy 2.png