Tekla Import Guide

From Bend-Tech 7x Wiki
Revision as of 07:45, 13 May 2016 by Fabcam1 (talk | contribs) (Hole Shape:)
Jump to: navigation, search

Bend-Tech's Tekla importer is useful for customers with .step and .iges file types that contain a boundary representation of the tube model. These file types are exported from the Tekla software programs. Examples are illustrated in the pictures below.

Tekla Import1.pngTekla Import2.png

Tekla Import Access

  • To access the Tekla Model Importer, select the CAD Import Menu CAD Import Menu1.png from the Task Menu and select the Tekla Model Tekla Model Icon1.png option from the list.

Select Tekla1.png

Open a Project

  • Select a file from the list and click the Open button to open it in the Tekla Import screen.

Tekla Open File1.png

Material Definition

Select Material1.png

1. The Select Material: drop down menu will be grayed out until the user has fully tracked the imported part. Once the part is tracked, it will need to be assigned a material which matches its Defined: outer diameter and wall thickness.

2. If a material is not set up in your material library that will match the imported part, clicking the Plus: IND Plus1.png button will add the imported material for you and assign it to the current part or project.

Outer Diameter1.png

3. The Material: section will show which material is chosen from the Select Material: drop down menu above. The Outside Diameter (OD) of the material will be shown next to the orange icon and the Material Wall Thickness will be shown next to the blue icon.

Wall Thickness1.png

4. The Defined: section will show which material is applied to the part after importing. The detected Outside Diameter (OD) of the material will be shown next to the orange icon and the detected Material Wall Thickness will be shown next to the blue icon.

Number Of Bends1.png

5. The number of bends detected in the part will be shown next to this icon.

Define

Define Section

Define Section Tekla1.png
  • In the Define section of the Tekla Import screen, users will be able to use the following basic functions in order to define their part in preparation for use in the Bend-Tech software. After each part is fully defined, it can then be saved to the Parts tab before it can be transferred to one of our other designers.





Create Tube By Dragging:

Click the Create Tube By Dragging Create Tube By Dragging Tekla1.png button, then click and drag your cursor of your mouse over any straight section of tubing that you'd like to define. IMPORTANT: This works best if you refrain from including bends, zoom in close to your intended tube, and drag the line in a direction that runs opposite of the length of tubing you are trying to define. See the illustration below for more detail.

Tekla Drag Mouse1.png

Join Connected Sections:

Click the Join Connected Sections Join Connected Sections Tekla1.png button, then select a straight length of defined tubing followed by an adjoining straight length of defined tubing. You will always have to click the center line of the defined straight in order to select it. The tube will highlight red to indicate that it is ready to be selected. See the illustration below for more detail.

Tekla Join Connected Sections1.png

Join With Bend:

Click the Join With Bend Join With Bend Tekla1.png button, then select a straight length of defined tubing followed by an adjoining straight length of defined tubing that is separated by a bend. You will always have to click the center line of the defined straight in order to select it. The tube will highlight red to indicate that it is ready to be selected. See the illustration below for more detail.

Tekla Join With Bend1.png

Remove Section:

Click the Remove Section Remove Section Tekla1.png button, then a straight or bent section of defined tubing in order to take away the definition for that section. You will always have to click the center line of the defined straight in order to select it. The tube will highlight red to indicate that it is ready to be selected. See the illustration below for more detail.

Tekla Remove Section1.png

Save Part:

Before saving a part, click on the green Plus: IND Plus1.png button next to the Select Material drop down menu and the detected material will be added to the part for you. Then, click the Save Part Save Part Tekla1.png button when a single part has been fully defined and it will be saved to the Parts tab and it will be ready to transfer to another designer.

Tekla Save Part1.png

Auto-Name Part

When the Auto-Name Part Auto Name Tekla1.png check box is checked, the part will be named automatically during the saving process. If it is unchecked, a window will appear prompting you to name the part when you click the Save Part button.

Manual Tools Section

Manual Tools Section Tekla1.png
  • In the Manual Tools section in the Tekla Import screen, users can manually add or subtract from a defined part or from the basic geometry of the imported file itself using the tools available.







Extend By Amount:

Click the Extend By Amount Extend By Amount Tekla1.png button followed by a defined straight length of tubing in order to extend that length of tubing by a designated value. A window will appear asking for the value that the tube end will be extended by, so enter the value for the extension and click the OK button to apply the change.

Tekla Extend By Amount1.png

Extend By Feature:

Click the Extend By Feature Extend By Feature Tekla1.png button followed by a defined straight length of tubing in order to extend that length of tubing by clicking on a feature that represents the new length.

Remove Feature:

Click the Remove Feature Remove Feature Tekla1.png button followed by a geometric feature in the design to remove it. This may help, in some cases, to help in defining a certain part in the design. Unnecessary geometric features can interfere with the defining process.

Tekla Remove Feature1.png

Add Line:

Click the Add Line Add Line Tekla1.png button followed by a location in the design that represents the start of the new line, then a location that represents the end of the new line. Creating new lines of geometry in the imported project may help bridge any gaps between parts to help them define properly.

Tekla Add Line1.png

CAD Brightness:

Adjusting the CAD Brightness CAD Brightness Tekla1.png will either brighten or dim the color of all geometric features within the imported design. This can be used to see defined parts when dimmed and see raw geometric features when brightened.

Cutting

Cutting picture Tekla1.png

The Cutting tab contains the tools necessary for adding cuts to the ends of parts. Wrappers can be printed which, when wrapped around the end of a tube, mark where the tube needs to be cut.














Make Cuts

Click the New Cut New cut.png button and click a part. The cut part will be highlighted in green once selected. Click a second part, plane, or multiple parts that the first part will be cut to fit against. The second and any consecutive selected parts will be highlighted in red. Click the Complete Complete.png button. The cut should appear in the list of cuts in the Cutting tab and shown on the assembly.


Cutting Tekla1.png


Click the "Auto-Cut" Auto cut.png button to let the software attempt to generate all cuts in the assembly project.


Click the "Auto-Miter" Auotmiter1.png button to extend the lengths of intersecting tubes past their center line so they can be cut equally.

Auto-miter1.pngAuto-miter2.pngAuto-miter3.png


When viewing the details for the wrappers for a mitered cut, they should have these qualities.


Auto-miter4.pngAuto-miter5.png


Cutting Plane

Using the "Cutting Plane" function to cut a section of tube is different from cutting tubes that intersect. This tool is used for cutting a specific place on a bend or straight tube that does not intersect another tube.

Using the cutting plane feature, a custom plane can be defined and used to place cuts anywhere on the assembly design.

To place a cutting plane, click the "New" New plane.png button under the "Cutting" tab and click on a PickPoint to define the center/base point of the plane. Then click the first and second direction of the plane.

Once a plane is place in the assembly, it can be used as a cutting feature and will allow straight cuts to be placed anywhere.

Cutting plane.png

To move the plane, click the "Move" New plane move.png button. Then click and drag the move tools directly on the plane to move, resize, and rotate the plane. See image below.

Plane move.png

Once the cutting plane in in the correct position, the user can record a cut by selecting the "New Cut" New cut.png button.

Then, select the tube that you are trying to cut, followed by the cutting plane itself. If you've done everything right, the cutting plane will be highlighted when you place your cursor over it.

Lastly, select the "Complete" Complete.png button and the new cut and information will show up on the left of the screen in the Cut Chart section.


Cut Settings

If the Outside Diameter Only option is checked, the software will not display the inside diameter cut line for each cut. Using a hole saw requires the checking of the outside of the material only. "Check" the option "Outside Diameter Only".

HoleSaw3.jpg

Using a grinder or plasma cutter requires checking of both sides of the material. "UnCheck" the option "Outside Diameter Only".

HoleSaw4.jpg


If Distance to Perp of Bend is checked, The red line will indicate the distance to the perpendicular of the bend. The cut wrapper's red line will display the distance to the tangent of the nearest bend combined with the outside radius of the bend.

If the Hide Completed Features option is checked, completed features from the cut will be hidden in the design.

If the Ignore Tube Ends option is checked, all cuts will ignore the excess tubing leftover from all other cuts.

If Mitered Cut is checked, all cuts will be calculated as straight mitered cuts. If you are using a hole saw to cut your tubes leave Mitered Cut unchecked.


Cut Chart

Cutting 2.png

A chart displaying a list of all the cuts currently applied to the assembly will be shown as well.

Click on a cut to see a preview of the cut on the 3D model of the assembly.


Click Delete Delete cut.png to remove the cut from the tube, or click Delete All Delete all cuts.png to remove all cuts from the Assembly project.


Click Print Print cut.png to print the currently selected wrapper, or click Print All Print all cuts.png to print out all wrappers for the entire Assembly project.


Cut wrapper.png

Click the Details button Details.png to see a preview of the cutting wrapper. On each wrapper, there is a red line with a number on it. This line is used for lining up a wrapper on a tube. The number is the distance from the end of the tube that the red line should be.


Click the Select button Select cut.png and click on a cut in the display area to select it from the assembly directly.

Cutting Definitions

  • Setback - Distance from the end of the tube to the centerline of the cross tube. This point is the intersection of the cross tube (centerline) and the centerline of the cut tube.
  • Offset - The up/down distance from the centerline of the cut tube to the centerline of the cross tube when looking at the face of the cut.
  • Angle - The plunge angle of the holesaw. A zero degree angle would be a plunge at a perpendicular (90 degree) angle to the cut tube.
  • Rotation - The rotation of the holesaw plunge in relation to the closest bend (or opposite side of the tube in the case of a straight tube).

Holes

Holes Tab Tekla1.png
  • The Holes tab is used to create hole geometry on your defined parts in order to transfer the data to the Dragon designer. These holes can then be assigned an action of cutting, engraving or marking based on your needs.















Hole From Lines:

Click on the Hole From Lines Holes From Lines Tekla1.png button followed by the defined part you'd like to place the hole on, then select a geometric feature that represents the first line of the hole followed finally by a line on the opposite side of the intended hole cutout.

Tekla Hole From Lines1.png

Create Hole:

Click on the Create Hole Create Hole Tekla1.png button followed by the defined part you'd like to place the hole on, then, if Free Select is enabled, click anywhere on the outer edge of the tubing in order to place the hole there. Without the use of Free Select, you must have a point placed in order to designate the hole's center point. For holes requiring a direction or angle (Square, Rectangle, Oval, Ellipse) after the hole's center point has been established, you will also be prompted to select a new point or line to indicate this.

Tekla Create Hole1.png

Delete Hole:

Click on the Delete Hole Delete Hole Tekla1.png button followed by a hole you'd like to remove, then the hole's geometry will be deleted from the design.

Tekla Delete Hole1.png

Hole Shape:

  • The Hole Shape section is where you will designate the type/shape of the hole that will be inserted into the design.

Hole Shape Tekla1.png

Round: Select the Round Tekla Hole Round1.png option to create a round hole in the design. The size of this hole will be determined by the value you enter into the Width: value field in the Hole Dimensions section.

Square: Select the Square Tekla Hole Square1.png option to create a square hole in the design. The size of this hole will be determined by the values you enter into the Width: and Corner Radius: value fields in the Hole Dimensions section.

Rectangle: Select the Rectangle Tekla Hole Rectangle1.png option to create a rectangular hole in the design. The size of this hole will be determined by the values you enter into the Width:, Height: and Corner Radius: value fields in the Hole Dimensions section.

Oval: Select the Oval Tekla Hole Oval1.png option to create a oval hole in the design. The size of this hole will be determined by the values you enter into the Width: and Height: value fields in the Hole Dimensions section.

Ellipse: Select the Ellipse Tekla Hole Ellipse1.png option to create a ellipse hole in the design. The size of this hole will be determined by the values you enter into the Width: and Height: value fields in the Hole Dimensions section.

Hole Dimensions:

  • The Hole Dimensions section is where you will enter the dimension values for the hole you have selected before you place it in the design.

Hole Dimensions Section Tekla1.png